Twin evaluation of a 3D field ROM and data transfer to FEA model inputs#

This example shows how PyTwin can be used to load and evaluate a twin model to predict CFD results in the form of temperature fields. Temperature fields are used as inputs for an FEA thermal structural analysis of a T-junction that considers the mixing of two different flow temperatures. The example uses PyTwin to evaluate the twin results and convert them to an appropriate format. It then uses PyMAPDL to load the FEA model, apply the temperature loads coming from the twin, and perform the thermal structural analysis.

Note

To generate snapshot files at initialization time, the ROM included in the twin must have its parameter field_data_storage_period set to 0 and its parameter store_snapshots set to 1.

To generate images files at initialization time, the ROM included in the twin must have the Embed Geometry and Generate Image options enabled at export time. Additionally, its parameter viewX_storage_period must be set to 0.

These parameters can be defined in the Twin Builder subsheet before twin compilation or be exposed as twin parameters.

../../_images/TBROM_cosim_pymapdl.png
# sphinx_gallery_thumbnail_path = '_static/TBROM_cosim_pymapdl.png'

Perform required imports and launch an instance of MAPDL#

Perform required imports, which include downloading and importing the input files, and launch an instance of MAPDL.

from ansys.mapdl.core import launch_mapdl
import numpy as np
import pandas as pd
from pytwin import TwinModel, download_file, read_binary
import pyvista as pv

twin_file = download_file("ThermalTBROM_23R1_other.twin", "twin_files", force_download=True)
fea_file = download_file("ThermalTBROM.dat", "other_files", force_download=True)

# start mapdl
mapdl = launch_mapdl()
print(mapdl)
PyMAPDL is taking longer than expected to connect to an MAPDL session.
Checking if there are any available licenses...
Product:             Ansys Mechanical Enterprise
MAPDL Version:       22.2
ansys.mapdl Version: 0.65.2

Define inputs#

Define inputs.

cfd_inputs = {"main_inlet_temperature": 353.15, "side_inlet_temperature": 293.15}
rom_parameters = {"ThermalROM23R1_1_store_snapshots": 1}

Define auxiliary functions#

Define an auxiliary function for converting the ROM snapshot for data mapping on an FEA mesh.

def snapshot_to_fea(snapshot_file, geometry_file):
    """Create a Pandas dataframe containing the x, y, z coordinates for the ROM
    and snapshot file results."""

    geometry_data = read_binary(geometry_file).reshape(-1, 3)
    snapshot_data = read_binary(snapshot_file).reshape(-1, 1)
    res_list = np.hstack((geometry_data, snapshot_data))

    return pd.DataFrame(res_list)

Import and save the mesh#

Reset MAPDL and import the geometry.

mapdl.clear()
mapdl.input(fea_file)

# Save the mesh as a VTK object.
print(mapdl.mesh)
grid = mapdl.mesh.grid  # Save mesh as a VTK object
ANSYS Mesh
  Number of Nodes:              30685
  Number of Elements:           20256
  Number of Element Types:      143
  Number of Node Components:    0
  Number of Element Components: 0

Load the twin runtime and generate temperature results#

Load the twin runtime and generate temperature results for the FEA mesh.

print("Loading model: {}".format(twin_file))
twin_model = TwinModel(twin_file)

twin_model.initialize_evaluation(inputs=cfd_inputs, parameters=rom_parameters)

rom_name = twin_model.tbrom_names[0]
snapshot = twin_model.get_snapshot_filepath(rom_name=rom_name)
geometry = twin_model.get_geometry_filepath(rom_name=rom_name)

temperature_file = snapshot_to_fea(snapshot, geometry)
Loading model: C:\Users\ansys\AppData\Local\Temp\TwinExamples\twin_files\ThermalTBROM_23R1_other.twin

Map temperature data to FEA mesh#

Map the temperature data to the FEA mesh.

temperature_data = temperature_file.values  # Save data to a NumPy array
nd_temp_data = temperature_data[:, :].astype(float)  # Change data type to float

# Map temperature data to the FE mesh
# Convert imported data into PolyData format
wrapped = pv.PolyData(nd_temp_data[:, :3])  # Convert NumPy array to PolyData format
wrapped["temperature"] = nd_temp_data[:, 3]  # Add a scalar variable 'temperature' to PolyData

# Perform data mapping
inter_grid = grid.interpolate(
    wrapped, sharpness=5, radius=0.0001, strategy="closest_point", progress_bar=True
)  # Map the imported data to MAPDL grid
inter_grid.plot(show_edges=False)  # Plot the interpolated data on MAPDL grid
temperature_load_val = pv.convert_array(
    pv.convert_array(inter_grid.active_scalars)
)  # Save temperatures interpolated to each node as a NumPy array
node_num = inter_grid.point_data["ansys_node_num"]  # Save node numbers as a NumPy array
  0%|          [00:00<?]
Interpolating:   0%|          [00:00<?]
Interpolating: 100%|██████████[00:00<00:00]
Interpolating: 100%|██████████[00:00<00:00]
Interpolating: 100%|██████████[00:00<00:00]
../../_images/TBROM_cosim_pymapdl_mapping.png

Apply loads and boundary conditions and solve the model#

Apply loads and boundary conditions and then solve the model.

# Read all nodal coordinates to an array and extract the X and Y
# minimum bounds
array_nodes = mapdl.mesh.nodes
Xmax = np.amax(array_nodes[:, 0])
Ymin = np.amin(array_nodes[:, 1])
Ymax = np.amax(array_nodes[:, 1])

# Enter /SOLU processor to apply loads and boundary conditions
mapdl.finish()
mapdl.slashsolu()

# Enter non-interactive mode to assign thermal load at each node using imported data
with mapdl.non_interactive:
    for node, temp in zip(node_num, temperature_load_val):
        mapdl.bf(node, "TEMP", temp)
# Use the X and Y minimum bounds to select nodes from five surfaces that are to be fixed
# Create a component and fix all degrees of freedom (DoFs)
mapdl.nsel("s", "LOC", "X", Xmax)  # Select all nodes whose X coord.=Xmax
mapdl.nsel("a", "LOC", "Y", Ymin)  # Select all nodes whose Y coord.=Ymin and add to previous selection
mapdl.nsel("a", "LOC", "Y", Ymax)  # Select all nodes whose Y coord.=Ymax and add to previous selection
mapdl.cm("fixed_nodes", "NODE")  # Create a nodal component 'fixed_nodes'
mapdl.allsel()  # Revert active selection to full model
mapdl.d("fixed_nodes", "all", 0)  # Impose fully fixed constraint on component created earlier

# Solve the model
output = mapdl.solve()
print(output)
*** NOTE ***                            CP =      14.172   TIME= 07:41:34
 The automatic domain decomposition logic has selected the MESH domain
 decomposition method with 2 processes per solution.

 *****  MAPDL SOLVE    COMMAND  *****

 *** WARNING ***                         CP =      14.172   TIME= 07:41:34
 Element shape checking is currently inactive.  Issue SHPP,ON or
 SHPP,WARN to reactivate, if desired.

 *** WARNING ***                         CP =      14.203   TIME= 07:41:34
 It has been detected that you are using reduced integration brick
 elements along with the PCG solver (EQSLV,PCG).  Please verify that
 you have multiple elements through the thickness in your model or
 switch to the SPARSE solver (EQSLV,SPARSE).

 *** NOTE ***                            CP =      14.266   TIME= 07:41:34
 The model data was checked and warning messages were found.
  Please review output or errors file (
 C:\Users\ansys\AppData\Local\Temp\ansys_pbhzjipqyc\file0.err ) for
 these warning messages.

 *** SELECTION OF ELEMENT TECHNOLOGIES FOR APPLICABLE ELEMENTS ***
      --- GIVE SUGGESTIONS AND RESET THE KEY OPTIONS ---

 ELEMENT TYPE         1 IS SOLID187. IT IS NOT ASSOCIATED WITH FULLY INCOMPRESSIBLE
 HYPERELASTIC MATERIALS. NO SUGGESTION IS AVAILABLE AND NO RESETTING IS NEEDED.

 ELEMENT TYPE         2 IS SOLID187. IT IS NOT ASSOCIATED WITH FULLY INCOMPRESSIBLE
 HYPERELASTIC MATERIALS. NO SUGGESTION IS AVAILABLE AND NO RESETTING IS NEEDED.

 ELEMENT TYPE         3 IS SOLID187. IT IS NOT ASSOCIATED WITH FULLY INCOMPRESSIBLE
 HYPERELASTIC MATERIALS. NO SUGGESTION IS AVAILABLE AND NO RESETTING IS NEEDED.

 ELEMENT TYPE         4 IS SOLID186. KEYOPT(2) IS ALREADY SET AS SUGGESTED AND NO
 RESETTING IS NEEDED.

 ELEMENT TYPE         5 IS SOLID187. IT IS NOT ASSOCIATED WITH FULLY INCOMPRESSIBLE
 HYPERELASTIC MATERIALS. NO SUGGESTION IS AVAILABLE AND NO RESETTING IS NEEDED.

 ELEMENT TYPE         6 IS SOLID187. IT IS NOT ASSOCIATED WITH FULLY INCOMPRESSIBLE
 HYPERELASTIC MATERIALS. NO SUGGESTION IS AVAILABLE AND NO RESETTING IS NEEDED.

 ELEMENT TYPE         7 IS SOLID187. IT IS NOT ASSOCIATED WITH FULLY INCOMPRESSIBLE
 HYPERELASTIC MATERIALS. NO SUGGESTION IS AVAILABLE AND NO RESETTING IS NEEDED.

 ELEMENT TYPE         8 IS SOLID187. IT IS NOT ASSOCIATED WITH FULLY INCOMPRESSIBLE
 HYPERELASTIC MATERIALS. NO SUGGESTION IS AVAILABLE AND NO RESETTING IS NEEDED.

 ELEMENT TYPE         9 IS SOLID186. KEYOPT(2) IS ALREADY SET AS SUGGESTED AND NO
 RESETTING IS NEEDED.

 ELEMENT TYPE        10 IS SOLID187. IT IS NOT ASSOCIATED WITH FULLY INCOMPRESSIBLE
 HYPERELASTIC MATERIALS. NO SUGGESTION IS AVAILABLE AND NO RESETTING IS NEEDED.

 ELEMENT TYPE        11 IS SOLID186. KEYOPT(2) IS ALREADY SET AS SUGGESTED AND NO
 RESETTING IS NEEDED.

 ELEMENT TYPE        12 IS SOLID187. IT IS NOT ASSOCIATED WITH FULLY INCOMPRESSIBLE
 HYPERELASTIC MATERIALS. NO SUGGESTION IS AVAILABLE AND NO RESETTING IS NEEDED.

 ELEMENT TYPE        13 IS SOLID186. KEYOPT(2) IS ALREADY SET AS SUGGESTED AND NO
 RESETTING IS NEEDED.

 ELEMENT TYPE        14 IS SOLID187. IT IS NOT ASSOCIATED WITH FULLY INCOMPRESSIBLE
 HYPERELASTIC MATERIALS. NO SUGGESTION IS AVAILABLE AND NO RESETTING IS NEEDED.

 ELEMENT TYPE        15 IS SOLID186. KEYOPT(2) IS ALREADY SET AS SUGGESTED AND NO
 RESETTING IS NEEDED.

 ELEMENT TYPE        16 IS SOLID187. IT IS NOT ASSOCIATED WITH FULLY INCOMPRESSIBLE
 HYPERELASTIC MATERIALS. NO SUGGESTION IS AVAILABLE AND NO RESETTING IS NEEDED.

 ELEMENT TYPE        17 IS SOLID186. KEYOPT(2) IS ALREADY SET AS SUGGESTED AND NO
 RESETTING IS NEEDED.

 ELEMENT TYPE        18 IS SOLID187. IT IS NOT ASSOCIATED WITH FULLY INCOMPRESSIBLE
 HYPERELASTIC MATERIALS. NO SUGGESTION IS AVAILABLE AND NO RESETTING IS NEEDED.

 ELEMENT TYPE        19 IS SOLID186. KEYOPT(2) IS ALREADY SET AS SUGGESTED AND NO
 RESETTING IS NEEDED.

 ELEMENT TYPE        20 IS SOLID187. IT IS NOT ASSOCIATED WITH FULLY INCOMPRESSIBLE
 HYPERELASTIC MATERIALS. NO SUGGESTION IS AVAILABLE AND NO RESETTING IS NEEDED.

 ELEMENT TYPE        21 IS SOLID186. KEYOPT(2) IS ALREADY SET AS SUGGESTED AND NO
 RESETTING IS NEEDED.

 ELEMENT TYPE        22 IS SOLID187. IT IS NOT ASSOCIATED WITH FULLY INCOMPRESSIBLE
 HYPERELASTIC MATERIALS. NO SUGGESTION IS AVAILABLE AND NO RESETTING IS NEEDED.

 ELEMENT TYPE        23 IS SOLID186. KEYOPT(2) IS ALREADY SET AS SUGGESTED AND NO
 RESETTING IS NEEDED.

 ELEMENT TYPE        24 IS SOLID187. IT IS NOT ASSOCIATED WITH FULLY INCOMPRESSIBLE
 HYPERELASTIC MATERIALS. NO SUGGESTION IS AVAILABLE AND NO RESETTING IS NEEDED.

 ELEMENT TYPE        25 IS SOLID187. IT IS NOT ASSOCIATED WITH FULLY INCOMPRESSIBLE
 HYPERELASTIC MATERIALS. NO SUGGESTION IS AVAILABLE AND NO RESETTING IS NEEDED.

 ELEMENT TYPE        26 IS SOLID187. IT IS NOT ASSOCIATED WITH FULLY INCOMPRESSIBLE
 HYPERELASTIC MATERIALS. NO SUGGESTION IS AVAILABLE AND NO RESETTING IS NEEDED.

 ELEMENT TYPE        27 IS SOLID187. IT IS NOT ASSOCIATED WITH FULLY INCOMPRESSIBLE
 HYPERELASTIC MATERIALS. NO SUGGESTION IS AVAILABLE AND NO RESETTING IS NEEDED.

 ELEMENT TYPE        28 IS SOLID187. IT IS NOT ASSOCIATED WITH FULLY INCOMPRESSIBLE
 HYPERELASTIC MATERIALS. NO SUGGESTION IS AVAILABLE AND NO RESETTING IS NEEDED.

 ELEMENT TYPE        29 IS SOLID187. IT IS NOT ASSOCIATED WITH FULLY INCOMPRESSIBLE
 HYPERELASTIC MATERIALS. NO SUGGESTION IS AVAILABLE AND NO RESETTING IS NEEDED.

 ELEMENT TYPE        30 IS SOLID187. IT IS NOT ASSOCIATED WITH FULLY INCOMPRESSIBLE
 HYPERELASTIC MATERIALS. NO SUGGESTION IS AVAILABLE AND NO RESETTING IS NEEDED.

 ELEMENT TYPE        31 IS SOLID187. IT IS NOT ASSOCIATED WITH FULLY INCOMPRESSIBLE
 HYPERELASTIC MATERIALS. NO SUGGESTION IS AVAILABLE AND NO RESETTING IS NEEDED.

 ELEMENT TYPE        32 IS SOLID187. IT IS NOT ASSOCIATED WITH FULLY INCOMPRESSIBLE
 HYPERELASTIC MATERIALS. NO SUGGESTION IS AVAILABLE AND NO RESETTING IS NEEDED.

 ELEMENT TYPE        33 IS SOLID186. KEYOPT(2) IS ALREADY SET AS SUGGESTED AND NO
 RESETTING IS NEEDED.

 ELEMENT TYPE        34 IS SOLID187. IT IS NOT ASSOCIATED WITH FULLY INCOMPRESSIBLE
 HYPERELASTIC MATERIALS. NO SUGGESTION IS AVAILABLE AND NO RESETTING IS NEEDED.

 ELEMENT TYPE        35 IS SOLID186. KEYOPT(2) IS ALREADY SET AS SUGGESTED AND NO
 RESETTING IS NEEDED.

 ELEMENT TYPE        36 IS SOLID187. IT IS NOT ASSOCIATED WITH FULLY INCOMPRESSIBLE
 HYPERELASTIC MATERIALS. NO SUGGESTION IS AVAILABLE AND NO RESETTING IS NEEDED.

 ELEMENT TYPE        37 IS SOLID186. KEYOPT(2) IS ALREADY SET AS SUGGESTED AND NO
 RESETTING IS NEEDED.

 ELEMENT TYPE        38 IS SOLID186. KEYOPT(2) IS ALREADY SET AS SUGGESTED AND NO
 RESETTING IS NEEDED.

 ELEMENT TYPE        39 IS SOLID187. IT IS NOT ASSOCIATED WITH FULLY INCOMPRESSIBLE
 HYPERELASTIC MATERIALS. NO SUGGESTION IS AVAILABLE AND NO RESETTING IS NEEDED.

 ELEMENT TYPE        40 IS SOLID186. KEYOPT(2) IS ALREADY SET AS SUGGESTED AND NO
 RESETTING IS NEEDED.

 ELEMENT TYPE        41 IS SOLID187. IT IS NOT ASSOCIATED WITH FULLY INCOMPRESSIBLE
 HYPERELASTIC MATERIALS. NO SUGGESTION IS AVAILABLE AND NO RESETTING IS NEEDED.

 ELEMENT TYPE        42 IS SOLID186. KEYOPT(2) IS ALREADY SET AS SUGGESTED AND NO
 RESETTING IS NEEDED.

 ELEMENT TYPE        43 IS SOLID186. KEYOPT(2) IS ALREADY SET AS SUGGESTED AND NO
 RESETTING IS NEEDED.

 ELEMENT TYPE        44 IS SOLID187. IT IS NOT ASSOCIATED WITH FULLY INCOMPRESSIBLE
 HYPERELASTIC MATERIALS. NO SUGGESTION IS AVAILABLE AND NO RESETTING IS NEEDED.

 ELEMENT TYPE        45 IS SOLID187. IT IS NOT ASSOCIATED WITH FULLY INCOMPRESSIBLE
 HYPERELASTIC MATERIALS. NO SUGGESTION IS AVAILABLE AND NO RESETTING IS NEEDED.

 ELEMENT TYPE        46 IS SOLID187. IT IS NOT ASSOCIATED WITH FULLY INCOMPRESSIBLE
 HYPERELASTIC MATERIALS. NO SUGGESTION IS AVAILABLE AND NO RESETTING IS NEEDED.

 ELEMENT TYPE        47 IS SOLID187. IT IS NOT ASSOCIATED WITH FULLY INCOMPRESSIBLE
 HYPERELASTIC MATERIALS. NO SUGGESTION IS AVAILABLE AND NO RESETTING IS NEEDED.

 ELEMENT TYPE        48 IS SOLID187. IT IS NOT ASSOCIATED WITH FULLY INCOMPRESSIBLE
 HYPERELASTIC MATERIALS. NO SUGGESTION IS AVAILABLE AND NO RESETTING IS NEEDED.

 ELEMENT TYPE        49 IS SOLID187. IT IS NOT ASSOCIATED WITH FULLY INCOMPRESSIBLE
 HYPERELASTIC MATERIALS. NO SUGGESTION IS AVAILABLE AND NO RESETTING IS NEEDED.

 ELEMENT TYPE        50 IS SOLID186. KEYOPT(2) IS ALREADY SET AS SUGGESTED AND NO
 RESETTING IS NEEDED.

 ELEMENT TYPE        51 IS SOLID187. IT IS NOT ASSOCIATED WITH FULLY INCOMPRESSIBLE
 HYPERELASTIC MATERIALS. NO SUGGESTION IS AVAILABLE AND NO RESETTING IS NEEDED.

 ELEMENT TYPE        52 IS SOLID186. KEYOPT(2) IS ALREADY SET AS SUGGESTED AND NO
 RESETTING IS NEEDED.

 ELEMENT TYPE        53 IS SOLID186. KEYOPT(2) IS ALREADY SET AS SUGGESTED AND NO
 RESETTING IS NEEDED.

 ELEMENT TYPE        54 IS SOLID186. KEYOPT(2) IS ALREADY SET AS SUGGESTED AND NO
 RESETTING IS NEEDED.



 *** MAPDL - ENGINEERING ANALYSIS SYSTEM  RELEASE 2022 R2          22.2     ***
 Ansys Mechanical Enterprise
 00000000  VERSION=WINDOWS x64   07:41:34  MAY 15, 2024 CP=     14.266

 T_Junction_1way_steady-state--Static Structural (B5)



                       S O L U T I O N   O P T I O N S

   PROBLEM DIMENSIONALITY. . . . . . . . . . . . .3-D
   DEGREES OF FREEDOM. . . . . . UX   UY   UZ
   ANALYSIS TYPE . . . . . . . . . . . . . . . . .STATIC (STEADY-STATE)
   OFFSET TEMPERATURE FROM ABSOLUTE ZERO . . . . .  273.15
   EQUATION SOLVER OPTION. . . . . . . . . . . . .PCG
      TOLERANCE. . . . . . . . . . . . . . . . . . 1.00000E-08
   GLOBALLY ASSEMBLED MATRIX . . . . . . . . . . .SYMMETRIC

 *** WARNING ***                         CP =      14.328   TIME= 07:41:34
 Material number 143 (used by element 29444) should normally have at
 least one MP or one TB type command associated with it.  Output of
 energy by material may not be available.

 *** NOTE ***                            CP =      14.359   TIME= 07:41:34
 The step data was checked and warning messages were found.
  Please review output or errors file (
 C:\Users\ansys\AppData\Local\Temp\ansys_pbhzjipqyc\file0.err ) for
 these warning messages.

 *** NOTE ***                            CP =      14.359   TIME= 07:41:34
 The conditions for direct assembly have been met.  No .emat or .erot
 files will be produced.

 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 55 and contact element type 55 has been set up.  The
 companion pair has real constant set ID 56.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.17596E+17
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.22732E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.31042E-02
 Average contact pair depth                   0.22732E-02
 Average target surface length                0.30935E-02
 Default pinball region factor PINB           0.25000
 *WARNING*: The default pinball radius may be too small to capture
 contacting zone under small sliding assumption.  Redefine the pinball
 radius if necessary.
 The resulting pinball region                 0.56830E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Min.  Initial gap 4.892041643E-04 was detected between contact element
 24597 and target element 24797.
 Contact is detected due to initial settings.

 Max.  Geometric gap 5.108346823E-04 has been detected between contact
 element 24608 and target element 24805.
 *WARNING*: The geometric gap/penetration may be too large.  Increase
 pinball radius if it is a true geometric gap/penetration.  Decrease
 pinball if it is a false one.
 ****************************************


 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 56 and contact element type 55 has been set up.  The
 companion pair has real constant set ID 55.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.17596E+17
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.22155E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.32205E-02
 Average contact pair depth                   0.22155E-02
 Average target surface length                0.29897E-02
 Default pinball region factor PINB           0.25000
 *WARNING*: The default pinball radius may be too small to capture
 contacting zone under small sliding assumption.  Redefine the pinball
 radius if necessary.
 The resulting pinball region                 0.55388E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Min.  Initial gap 4.914598591E-04 was detected between contact element
 24703 and target element 24481.
 Contact is detected due to initial settings.

 Max.  Geometric gap 5.103830541E-04 has been detected between contact
 element 24711 and target element 24504.
 *WARNING*: The geometric gap/penetration may be too large.  Increase
 pinball radius if it is a true geometric gap/penetration.  Decrease
 pinball if it is a false one.
 ****************************************


 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 57 and contact element type 57 has been set up.  The
 companion pair has real constant set ID 58.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.10201E+17
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.39212E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.46042E-02
 Average contact pair depth                   0.39212E-02
 Average target surface length                0.28864E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.98030E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Min.  Initial gap 4.910065956E-04 was detected between contact element
 24874 and target element 24952.
 Contact is detected due to initial settings.

 Max.  Geometric gap 5.061191669E-04 has been detected between contact
 element 24876 and target element 24950.
 *WARNING*: The geometric gap/penetration may be too large.  Increase
 pinball radius if it is a true geometric gap/penetration.  Decrease
 pinball if it is a false one.
 ****************************************


 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 58 and contact element type 57 has been set up.  The
 companion pair has real constant set ID 57.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.10201E+17
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.25334E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.29829E-02
 Average contact pair depth                   0.25334E-02
 Average target surface length                0.44708E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.63336E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Min.  Initial gap 4.920431168E-04 was detected between contact element
 24917 and target element 24833.
 Contact is detected due to initial settings.

 Max.  Geometric gap 5.061138968E-04 has been detected between contact
 element 24909 and target element 24836.
 *WARNING*: The geometric gap/penetration may be too large.  Increase
 pinball radius if it is a true geometric gap/penetration.  Decrease
 pinball if it is a false one.
 ****************************************


 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 59 and contact element type 59 has been set up.  The
 companion pair has real constant set ID 60.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.60075E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.44676E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.59960E-02
 Average contact pair depth                   0.44676E-02
 Average target surface length                0.14709E-01
 Default pinball region factor PINB           0.25000
 *WARNING*: The default pinball radius may be too small to capture
 contacting zone under small sliding assumption.  Redefine the pinball
 radius if necessary.
 The resulting pinball region                 0.11169E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Min.  Initial gap 3.496108984E-04 was detected between contact element
 25077 and target element 25110.
 Contact is detected due to initial settings.

 Max.  Geometric gap 1.116099622E-03 has been detected between contact
 element 25085 and target element 25106.
 *WARNING*: The geometric gap/penetration may be too large.  Increase
 pinball radius if it is a true geometric gap/penetration.  Decrease
 pinball if it is a false one.
 ****************************************


 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 60 and contact element type 59 has been set up.  The
 companion pair has real constant set ID 59.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.60075E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.66583E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.15831E-01
 Average contact pair depth                   0.66583E-02
 Average target surface length                0.58424E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.16646E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Min.  Initial gap 3.532073558E-04 was detected between contact element
 25098 and target element 24995.
 Contact is detected due to initial settings.

 Max.  Geometric gap 1.544991189E-03 has been detected between contact
 element 25094 and target element 25020.
 *WARNING*: The geometric gap/penetration may be too large.  Increase
 pinball radius if it is a true geometric gap/penetration.  Decrease
 pinball if it is a false one.
 ****************************************


 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 61 and contact element type 61 has been set up.  The
 companion pair has real constant set ID 62.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.51152E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.33229E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.49022E-02
 Average contact pair depth                   0.33229E-02
 Average target surface length                0.14531E-01
 Default pinball region factor PINB           0.25000
 *WARNING*: The default pinball radius may be too small to capture
 contacting zone under small sliding assumption.  Redefine the pinball
 radius if necessary.
 The resulting pinball region                 0.83073E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Min.  Initial gap 2.598040708E-04 was detected between contact element
 25254 and target element 25302.
 Contact is detected due to initial settings.

 Max.  Geometric gap 6.188006116E-04 has been detected between contact
 element 25275 and target element 25298.
 *WARNING*: The geometric gap/penetration may be too large.  Increase
 pinball radius if it is a true geometric gap/penetration.  Decrease
 pinball if it is a false one.
 ****************************************


 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 62 and contact element type 61 has been set up.  The
 companion pair has real constant set ID 61.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.51152E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.78199E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.15617E-01
 Average contact pair depth                   0.78199E-02
 Average target surface length                0.47793E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.19550E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Min.  Initial gap 2.739881357E-04 was detected between contact element
 25290 and target element 25174.
 Contact is detected due to initial settings.

 Max.  Geometric gap 5.011163479E-04 has been detected between contact
 element 25283 and target element 25162.
 ****************************************


 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 63 and contact element type 63 has been set up.  The
 companion pair has real constant set ID 64.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.83686E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.18117E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.29027E-02
 Average contact pair depth                   0.18117E-02
 Average target surface length                0.81936E-02
 Default pinball region factor PINB           0.25000
 *WARNING*: The default pinball radius may be too small to capture
 contacting zone under small sliding assumption.  Redefine the pinball
 radius if necessary.
 The resulting pinball region                 0.45292E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 No contact was detected for this contact pair.
 ****************************************


 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 64 and contact element type 63 has been set up.  The
 companion pair has real constant set ID 63.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.83686E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.47798E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.87520E-02
 Average contact pair depth                   0.47798E-02
 Average target surface length                0.29186E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.11949E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Min.  Initial gap 5.008751444E-04 was detected between contact element
 25327 and target element 25310.
 Contact is detected due to initial settings.

 Max.  Geometric gap 6.116710797E-04 has been detected between contact
 element 25330 and target element 25313.
 *WARNING*: The geometric gap/penetration may be too large.  Increase
 pinball radius if it is a true geometric gap/penetration.  Decrease
 pinball if it is a false one.
 ****************************************


 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 65 and contact element type 65 has been set up.  The
 companion pair has real constant set ID 66.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.47822E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.22750E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.36454E-02
 Average contact pair depth                   0.22750E-02
 Average target surface length                0.98585E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.56876E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Max.  Initial penetration 1.736955052E-04 was detected between contact
 element 25361 and target element 25388.
 You may move entire target surface by : x= 2.91539766E-20, y=
 -1.736955052E-04, z= -3.343422002E-20,to reduce initial penetration.
 ****************************************


 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 66 and contact element type 65 has been set up.  The
 companion pair has real constant set ID 65.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.47822E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.83643E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.10201E-01
 Average contact pair depth                   0.83643E-02
 Average target surface length                0.37691E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.20911E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Max.  Initial penetration 6.195620121E-05 was detected between contact
 element 25372 and target element 25349.
 You may move entire target surface by : x= -8.98413284E-06, y=
 6.129957E-05, z= 4.679138581E-07,to reduce initial penetration.
 ****************************************


 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 67 and contact element type 67 has been set up.  The
 companion pair has real constant set ID 68.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.67332E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.24430E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.67716E-02
 Average contact pair depth                   0.24430E-02
 Average target surface length                0.13778E-01
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.61076E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Max.  Initial penetration 0 was detected between contact element 25421
 and target element 25467.
 ****************************************


 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 68 and contact element type 67 has been set up.  The
 companion pair has real constant set ID 67.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.67332E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.59407E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.14115E-01
 Average contact pair depth                   0.59407E-02
 Average target surface length                0.67254E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.14852E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Max.  Initial penetration 2.775557562E-17 was detected between contact
 element 25443 and target element 25409.
 ****************************************


 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 69 and contact element type 69 has been set up.  The
 companion pair has real constant set ID 70.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.37743E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.24103E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.67716E-02
 Average contact pair depth                   0.24103E-02
 Average target surface length                0.12921E-01
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.60258E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Max.  Initial penetration 1.021405789E-04 was detected between contact
 element 25492 and target element 25546.
 You may move entire target surface by : x= 3.178767662E-19, y=
 1.021405789E-04, z= -4.486295031E-19,to reduce initial penetration.
 ****************************************


 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 70 and contact element type 69 has been set up.  The
 companion pair has real constant set ID 69.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.37743E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.10598E-02
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.13550E-01
 Average contact pair depth                   0.10598E-01
 Average target surface length                0.67254E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.26495E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Max.  Initial penetration 7.29363013E-05 was detected between contact
 element 25520 and target element 25475.
 You may move entire target surface by : x= -4.791479912E-07, y=
 -7.201771111E-05, z= 1.152925631E-05,to reduce initial penetration.
 ****************************************


 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 71 and contact element type 71 has been set up.  The
 companion pair has real constant set ID 72.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.82245E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.15807E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.29429E-02
 Average contact pair depth                   0.15807E-02
 Average target surface length                0.89008E-02
 Default pinball region factor PINB           0.25000
 *WARNING*: The default pinball radius may be too small to capture
 contacting zone under small sliding assumption.  Redefine the pinball
 radius if necessary.
 The resulting pinball region                 0.39518E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 No contact was detected for this contact pair.
 ****************************************


 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 72 and contact element type 71 has been set up.  The
 companion pair has real constant set ID 71.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.82245E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.48635E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.95806E-02
 Average contact pair depth                   0.48635E-02
 Average target surface length                0.29151E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.12159E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Min.  Initial gap 4.996627913E-04 was detected between contact element
 25591 and target element 25558.
 Contact is detected due to initial settings.

 Max.  Geometric gap 8.477829511E-04 has been detected between contact
 element 25580 and target element 25566.
 *WARNING*: The geometric gap/penetration may be too large.  Increase
 pinball radius if it is a true geometric gap/penetration.  Decrease
 pinball if it is a false one.
 ****************************************


 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 73 and contact element type 73 has been set up.  The
 companion pair has real constant set ID 74.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.48536E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.21852E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.36454E-02
 Average contact pair depth                   0.21852E-02
 Average target surface length                0.96458E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.54630E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Max.  Initial penetration 1.736954878E-04 was detected between contact
 element 25627 and target element 25656.
 You may move entire target surface by : x= -1.162760459E-18, y=
 1.736954878E-04, z= 1.256153359E-18,to reduce initial penetration.
 ****************************************


 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 74 and contact element type 73 has been set up.  The
 companion pair has real constant set ID 73.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.48536E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.82412E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.99777E-02
 Average contact pair depth                   0.82412E-02
 Average target surface length                0.37691E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.20603E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Max.  Initial penetration 6.195620923E-05 was detected between contact
 element 25639 and target element 25615.
 You may move entire target surface by : x= -8.984135126E-06, y=
 -6.129957778E-05, z= 4.679135334E-07,to reduce initial penetration.
 ****************************************


 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 75 and contact element type 75 has been set up.  The
 companion pair has real constant set ID 76.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.10596E+17
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.37750E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.57784E-02
 Average contact pair depth                   0.37750E-02
 Average target surface length                0.35009E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.94375E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Min.  Initial gap 4.990860284E-04 was detected between contact element
 25711 and target element 25754.
 Contact is detected due to initial settings.

 Max.  Geometric gap 6.638924593E-04 has been detected between contact
 element 25716 and target element 25755.
 *WARNING*: The geometric gap/penetration may be too large.  Increase
 pinball radius if it is a true geometric gap/penetration.  Decrease
 pinball if it is a false one.
 ****************************************


 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 76 and contact element type 75 has been set up.  The
 companion pair has real constant set ID 75.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.10596E+17
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.19156E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.34841E-02
 Average contact pair depth                   0.19156E-02
 Average target surface length                0.53755E-02
 Default pinball region factor PINB           0.25000
 *WARNING*: The default pinball radius may be too small to capture
 contacting zone under small sliding assumption.  Redefine the pinball
 radius if necessary.
 The resulting pinball region                 0.47891E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 No contact was detected for this contact pair.
 ****************************************


 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 77 and contact element type 77 has been set up.  The
 companion pair has real constant set ID 78.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.88335E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.45282E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.79821E-02
 Average contact pair depth                   0.45282E-02
 Average target surface length                0.29186E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.11321E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Min.  Initial gap 4.991211658E-04 was detected between contact element
 25776 and target element 25808.
 Contact is detected due to initial settings.

 Max.  Geometric gap 5.769895291E-04 has been detected between contact
 element 25780 and target element 25809.
 *WARNING*: The geometric gap/penetration may be too large.  Increase
 pinball radius if it is a true geometric gap/penetration.  Decrease
 pinball if it is a false one.
 ****************************************


 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 78 and contact element type 77 has been set up.  The
 companion pair has real constant set ID 77.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.88335E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.18117E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.29027E-02
 Average contact pair depth                   0.18117E-02
 Average target surface length                0.75160E-02
 Default pinball region factor PINB           0.25000
 *WARNING*: The default pinball radius may be too small to capture
 contacting zone under small sliding assumption.  Redefine the pinball
 radius if necessary.
 The resulting pinball region                 0.45292E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 No contact was detected for this contact pair.
 ****************************************


 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 79 and contact element type 79 has been set up.  The
 companion pair has real constant set ID 80.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.59545E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.56296E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.88012E-02
 Average contact pair depth                   0.56296E-02
 Average target surface length                0.86839E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.14074E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Min.  Initial gap 4.350596782E-04 was detected between contact element
 25846 and target element 25866.
 Contact is detected due to initial settings.

 Max.  Geometric gap 4.922200165E-04 has been detected between contact
 element 25847 and target element 25868.
 ****************************************


 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 80 and contact element type 79 has been set up.  The
 companion pair has real constant set ID 79.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.59545E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.67176E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.88969E-02
 Average contact pair depth                   0.67176E-02
 Average target surface length                0.83043E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.16794E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Min.  Initial gap 4.369370711E-04 was detected between contact element
 25854 and target element 25821.
 Contact is detected due to initial settings.

 Max.  Geometric gap 4.873658423E-04 has been detected between contact
 element 25863 and target element 25820.
 ****************************************


 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 81 and contact element type 81 has been set up.  The
 companion pair has real constant set ID 82.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.60222E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.57913E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.98935E-02
 Average contact pair depth                   0.57913E-02
 Average target surface length                0.86839E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.14478E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Min.  Initial gap 4.441485883E-04 was detected between contact element
 25912 and target element 25935.
 Contact is detected due to initial settings.

 Max.  Geometric gap 5.632278433E-04 has been detected between contact
 element 25913 and target element 25938.
 ****************************************


 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 82 and contact element type 81 has been set up.  The
 companion pair has real constant set ID 81.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.60222E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.66421E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.88969E-02
 Average contact pair depth                   0.66421E-02
 Average target surface length                0.92954E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.16605E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Min.  Initial gap 4.294073687E-04 was detected between contact element
 25923 and target element 25890.
 Contact is detected due to initial settings.

 Max.  Geometric gap 6.261542594E-04 has been detected between contact
 element 25925 and target element 25884.
 ****************************************


 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 83 and contact element type 83 has been set up.  The
 companion pair has real constant set ID 84.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.60735E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.22691E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.36454E-02
 Average contact pair depth                   0.22691E-02
 Average target surface length                0.11876E-01
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.56728E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Max.  Initial penetration 5.551115123E-17 was detected between contact
 element 25963 and target element 25989.
 ****************************************


 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 84 and contact element type 83 has been set up.  The
 companion pair has real constant set ID 83.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.60735E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.65860E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.12255E-01
 Average contact pair depth                   0.65860E-02
 Average target surface length                0.37691E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.16465E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Max.  Initial penetration 8.326672685E-17 was detected between contact
 element 25972 and target element 25946.
 ****************************************


 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 85 and contact element type 85 has been set up.  The
 companion pair has real constant set ID 86.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.53384E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.22750E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.36454E-02
 Average contact pair depth                   0.22750E-02
 Average target surface length                0.10238E-01
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.56876E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Max.  Initial penetration 1.736954878E-04 was detected between contact
 element 26009 and target element 26050.
 You may move entire target surface by : x= 1.054076711E-18, y=
 1.736954878E-04, z= 1.298304891E-18,to reduce initial penetration.
 ****************************************


 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 86 and contact element type 85 has been set up.  The
 companion pair has real constant set ID 85.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.53384E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.74929E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.10632E-01
 Average contact pair depth                   0.74929E-02
 Average target surface length                0.37691E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.18732E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.703   TIME= 07:41:35
 Max.  Initial penetration 6.195620924E-05 was detected between contact
 element 26033 and target element 25997.
 You may move entire target surface by : x= 8.984135126E-06, y=
 -6.129957778E-05, z= 4.679135334E-07,to reduce initial penetration.
 ****************************************


 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 87 and contact element type 87 has been set up.  The
 companion pair has real constant set ID 88.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.94595E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.42286E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.57472E-02
 Average contact pair depth                   0.42286E-02
 Average target surface length                0.37019E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.10571E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Min.  Initial gap 4.990834106E-04 was detected between contact element
 26104 and target element 26139.
 Contact is detected due to initial settings.

 Max.  Geometric gap 6.97250943E-04 has been detected between contact
 element 26113 and target element 26137.
 *WARNING*: The geometric gap/penetration may be too large.  Increase
 pinball radius if it is a true geometric gap/penetration.  Decrease
 pinball if it is a false one.
 ****************************************


 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 88 and contact element type 87 has been set up.  The
 companion pair has real constant set ID 87.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.94595E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.24192E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.35975E-02
 Average contact pair depth                   0.24192E-02
 Average target surface length                0.54068E-02
 Default pinball region factor PINB           0.25000
 *WARNING*: The default pinball radius may be too small to capture
 contacting zone under small sliding assumption.  Redefine the pinball
 radius if necessary.
 The resulting pinball region                 0.60481E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Min.  Initial gap 4.991700363E-04 was detected between contact element
 26127 and target element 26073.
 Contact is detected due to initial settings.

 Max.  Geometric gap 6.001E-04 has been detected between contact element
 26117 and target element 26061.
 *WARNING*: The geometric gap/penetration may be too large.  Increase
 pinball radius if it is a true geometric gap/penetration.  Decrease
 pinball if it is a false one.
 ****************************************


 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 89 and contact element type 89 has been set up.  The
 companion pair has real constant set ID 90.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.62088E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.64425E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.10904E-01
 Average contact pair depth                   0.64425E-02
 Average target surface length                0.91710E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.16106E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Min.  Initial gap 4.237187747E-04 was detected between contact element
 26176 and target element 26205.
 Contact is detected due to initial settings.

 Max.  Geometric gap 5.530475212E-04 has been detected between contact
 element 26162 and target element 26199.
 ****************************************


 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 90 and contact element type 89 has been set up.  The
 companion pair has real constant set ID 89.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.62088E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.59953E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.94667E-02
 Average contact pair depth                   0.59953E-02
 Average target surface length                0.10188E-01
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.14988E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Min.  Initial gap 4.237389866E-04 was detected between contact element
 26193 and target element 26155.
 Contact is detected due to initial settings.

 Max.  Geometric gap 6.133708155E-04 has been detected between contact
 element 26184 and target element 26141.
 ****************************************


 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 91 and contact element type 91 has been set up.  The
 companion pair has real constant set ID 92.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.62448E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.64053E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.97988E-02
 Average contact pair depth                   0.64053E-02
 Average target surface length                0.88085E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.16013E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Min.  Initial gap 4.34010795E-04 was detected between contact element
 26236 and target element 26276.
 Contact is detected due to initial settings.

 Max.  Geometric gap 1.432523123E-03 has been detected between contact
 element 26248 and target element 26268.
 *WARNING*: The geometric gap/penetration may be too large.  Increase
 pinball radius if it is a true geometric gap/penetration.  Decrease
 pinball if it is a false one.
 ****************************************


 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 92 and contact element type 91 has been set up.  The
 companion pair has real constant set ID 91.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.62448E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.60337E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.90933E-02
 Average contact pair depth                   0.60337E-02
 Average target surface length                0.92820E-02
 Default pinball region factor PINB           0.25000
 *WARNING*: The default pinball radius may be too small to capture
 contacting zone under small sliding assumption.  Redefine the pinball
 radius if necessary.
 The resulting pinball region                 0.15084E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Min.  Initial gap 4.245125538E-04 was detected between contact element
 26263 and target element 26213.
 Contact is detected due to initial settings.

 Max.  Geometric gap 1.225092739E-03 has been detected between contact
 element 26260 and target element 26225.
 *WARNING*: The geometric gap/penetration may be too large.  Increase
 pinball radius if it is a true geometric gap/penetration.  Decrease
 pinball if it is a false one.
 ****************************************


 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 93 and contact element type 93 has been set up.  The
 companion pair has real constant set ID 94.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.17429E+17
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.22950E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.31471E-02
 Average contact pair depth                   0.22950E-02
 Average target surface length                0.30838E-02
 Default pinball region factor PINB           0.25000
 *WARNING*: The default pinball radius may be too small to capture
 contacting zone under small sliding assumption.  Redefine the pinball
 radius if necessary.
 The resulting pinball region                 0.57376E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Min.  Initial gap 4.918864337E-04 was detected between contact element
 26465 and target element 26665.
 Contact is detected due to initial settings.

 Max.  Geometric gap 5.046381826E-04 has been detected between contact
 element 26460 and target element 26660.
 *WARNING*: The geometric gap/penetration may be too large.  Increase
 pinball radius if it is a true geometric gap/penetration.  Decrease
 pinball if it is a false one.
 ****************************************


 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 94 and contact element type 93 has been set up.  The
 companion pair has real constant set ID 93.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.17429E+17
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.22169E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.32086E-02
 Average contact pair depth                   0.22169E-02
 Average target surface length                0.30320E-02
 Default pinball region factor PINB           0.25000
 *WARNING*: The default pinball radius may be too small to capture
 contacting zone under small sliding assumption.  Redefine the pinball
 radius if necessary.
 The resulting pinball region                 0.55424E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Min.  Initial gap 4.910400799E-04 was detected between contact element
 26570 and target element 26362.
 Contact is detected due to initial settings.

 Max.  Geometric gap 5.057185782E-04 has been detected between contact
 element 26554 and target element 26357.
 *WARNING*: The geometric gap/penetration may be too large.  Increase
 pinball radius if it is a true geometric gap/penetration.  Decrease
 pinball if it is a false one.
 ****************************************


 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 95 and contact element type 95 has been set up.  The
 companion pair has real constant set ID 96.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.10125E+17
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.39504E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.50026E-02
 Average contact pair depth                   0.39504E-02
 Average target surface length                0.28060E-02
 Default pinball region factor PINB           0.25000
 *WARNING*: The default pinball radius may be too small to capture
 contacting zone under small sliding assumption.  Redefine the pinball
 radius if necessary.
 The resulting pinball region                 0.98761E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Min.  Initial gap 4.957711692E-04 was detected between contact element
 26733 and target element 26809.
 Contact is detected due to initial settings.

 Max.  Geometric gap 6.258167582E-04 has been detected between contact
 element 26734 and target element 26811.
 *WARNING*: The geometric gap/penetration may be too large.  Increase
 pinball radius if it is a true geometric gap/penetration.  Decrease
 pinball if it is a false one.
 ****************************************


 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 96 and contact element type 95 has been set up.  The
 companion pair has real constant set ID 95.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.10125E+17
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.22075E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.29125E-02
 Average contact pair depth                   0.22075E-02
 Average target surface length                0.48301E-02
 Default pinball region factor PINB           0.25000
 *WARNING*: The default pinball radius may be too small to capture
 contacting zone under small sliding assumption.  Redefine the pinball
 radius if necessary.
 The resulting pinball region                 0.55187E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Min.  Initial gap 4.914825104E-04 was detected between contact element
 26771 and target element 26711.
 Contact is detected due to initial settings.

 Max.  Geometric gap 5.460017812E-04 has been detected between contact
 element 26755 and target element 26687.
 *WARNING*: The geometric gap/penetration may be too large.  Increase
 pinball radius if it is a true geometric gap/penetration.  Decrease
 pinball if it is a false one.
 ****************************************


 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 97 and contact element type 97 has been set up.  The
 companion pair has real constant set ID 98.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.31133E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.24430E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.67716E-02
 Average contact pair depth                   0.24430E-02
 Average target surface length                0.19342E-01
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.61076E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Max.  Initial penetration 2.775557562E-17 was detected between contact
 element 26842 and target element 26873.
 ****************************************


 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 98 and contact element type 97 has been set up.  The
 companion pair has real constant set ID 97.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.31133E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.12848E-02
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.20130E-01
 Average contact pair depth                   0.12848E-01
 Average target surface length                0.67254E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.32120E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Max.  Initial penetration 0 was detected between contact element 26862
 and target element 26829.
 ****************************************


 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 99 and contact element type 99 has been set up.  The
 companion pair has real constant set ID 100.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.33165E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.24139E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.67716E-02
 Average contact pair depth                   0.24139E-02
 Average target surface length                0.17168E-01
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.60349E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Max.  Initial penetration 2.775557562E-17 was detected between contact
 element 26908 and target element 26941.
 ****************************************


 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 100 and contact element type 99 has been set up.  The
 companion pair has real constant set ID 99.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.33165E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.12061E-02
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.17767E-01
 Average contact pair depth                   0.12061E-01
 Average target surface length                0.67254E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.30153E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Max.  Initial penetration 0 was detected between contact element 26924
 and target element 26899.
 ****************************************


 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 101 and contact element type 101 has been set up.  The
 companion pair has real constant set ID 102.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.17100E+17
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.23392E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.31249E-02
 Average contact pair depth                   0.23392E-02
 Average target surface length                0.30838E-02
 Default pinball region factor PINB           0.25000
 *WARNING*: The default pinball radius may be too small to capture
 contacting zone under small sliding assumption.  Redefine the pinball
 radius if necessary.
 The resulting pinball region                 0.58479E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Min.  Initial gap 4.918864151E-04 was detected between contact element
 27140 and target element 27339.
 Contact is detected due to initial settings.

 Max.  Geometric gap 5.046381865E-04 has been detected between contact
 element 27135 and target element 27334.
 *WARNING*: The geometric gap/penetration may be too large.  Increase
 pinball radius if it is a true geometric gap/penetration.  Decrease
 pinball if it is a false one.
 ****************************************


 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 102 and contact element type 101 has been set up.  The
 companion pair has real constant set ID 101.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.17100E+17
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.22185E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.32086E-02
 Average contact pair depth                   0.22185E-02
 Average target surface length                0.30136E-02
 Default pinball region factor PINB           0.25000
 *WARNING*: The default pinball radius may be too small to capture
 contacting zone under small sliding assumption.  Redefine the pinball
 radius if necessary.
 The resulting pinball region                 0.55462E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Min.  Initial gap 4.910400625E-04 was detected between contact element
 27244 and target element 27038.
 Contact is detected due to initial settings.

 Max.  Geometric gap 5.057185729E-04 has been detected between contact
 element 27228 and target element 27033.
 *WARNING*: The geometric gap/penetration may be too large.  Increase
 pinball radius if it is a true geometric gap/penetration.  Decrease
 pinball if it is a false one.
 ****************************************


 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 103 and contact element type 103 has been set up.  The
 companion pair has real constant set ID 104.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.98248E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.40713E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.50184E-02
 Average contact pair depth                   0.40713E-02
 Average target surface length                0.28014E-02
 Default pinball region factor PINB           0.25000
 *WARNING*: The default pinball radius may be too small to capture
 contacting zone under small sliding assumption.  Redefine the pinball
 radius if necessary.
 The resulting pinball region                 0.10178E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Min.  Initial gap 4.9577117E-04 was detected between contact element
 27407 and target element 27486.
 Contact is detected due to initial settings.

 Max.  Geometric gap 6.25816756E-04 has been detected between contact
 element 27408 and target element 27483.
 *WARNING*: The geometric gap/penetration may be too large.  Increase
 pinball radius if it is a true geometric gap/penetration.  Decrease
 pinball if it is a false one.
 ****************************************


 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 104 and contact element type 103 has been set up.  The
 companion pair has real constant set ID 103.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.98248E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.20033E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.29087E-02
 Average contact pair depth                   0.20033E-02
 Average target surface length                0.48437E-02
 Default pinball region factor PINB           0.25000
 *WARNING*: The default pinball radius may be too small to capture
 contacting zone under small sliding assumption.  Redefine the pinball
 radius if necessary.
 The resulting pinball region                 0.50083E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Min.  Initial gap 4.914419015E-04 was detected between contact element
 27445 and target element 27362.
 Contact is detected due to initial settings.

 Max.  Geometric gap 5.00806719E-04 has been detected between contact
 element 27432 and target element 27364.
 *WARNING*: The geometric gap/penetration may be too large.  Increase
 pinball radius if it is a true geometric gap/penetration.  Decrease
 pinball if it is a false one.
 ****************************************


 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 105 and contact element type 105 has been set up.  The
 companion pair has real constant set ID 106.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.33684E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.23981E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.67716E-02
 Average contact pair depth                   0.23981E-02
 Average target surface length                0.19342E-01
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.59952E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Max.  Initial penetration 2.775557562E-17 was detected between contact
 element 27518 and target element 27550.
 ****************************************


 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 106 and contact element type 105 has been set up.  The
 companion pair has real constant set ID 105.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.33684E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.11875E-02
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.20130E-01
 Average contact pair depth                   0.11875E-01
 Average target surface length                0.67254E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.29687E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Max.  Initial penetration 0 was detected between contact element 27532
 and target element 27502.
 ****************************************


 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 107 and contact element type 107 has been set up.  The
 companion pair has real constant set ID 108.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.31392E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.24176E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.67716E-02
 Average contact pair depth                   0.24176E-02
 Average target surface length                0.17168E-01
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.60439E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Max.  Initial penetration 2.775557562E-17 was detected between contact
 element 27584 and target element 27626.
 ****************************************


 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 108 and contact element type 107 has been set up.  The
 companion pair has real constant set ID 107.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.31392E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.12742E-02
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.17767E-01
 Average contact pair depth                   0.12742E-01
 Average target surface length                0.67254E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.31855E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Max.  Initial penetration 2.775557562E-17 was detected between contact
 element 27610 and target element 27567.
 ****************************************


 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 109 and contact element type 109 has been set up.  The
 companion pair has real constant set ID 110.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.61780E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.64746E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.55245E-02
 Average contact pair depth                   0.64746E-02
 Average target surface length                0.37019E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.16187E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Min.  Initial gap 4.991801484E-04 was detected between contact element
 27675 and target element 27707.
 Contact is detected due to initial settings.

 Max.  Geometric gap 6.032847174E-04 has been detected between contact
 element 27678 and target element 27705.
 ****************************************


 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 110 and contact element type 109 has been set up.  The
 companion pair has real constant set ID 109.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.61780E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.24192E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.35975E-02
 Average contact pair depth                   0.24192E-02
 Average target surface length                0.51776E-02
 Default pinball region factor PINB           0.25000
 *WARNING*: The default pinball radius may be too small to capture
 contacting zone under small sliding assumption.  Redefine the pinball
 radius if necessary.
 The resulting pinball region                 0.60481E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Min.  Initial gap 4.99166501E-04 was detected between contact element
 27690 and target element 27644.
 Contact is detected due to initial settings.

 Max.  Geometric gap 6.001E-04 has been detected between contact element
 27685 and target element 27635.
 *WARNING*: The geometric gap/penetration may be too large.  Increase
 pinball radius if it is a true geometric gap/penetration.  Decrease
 pinball if it is a false one.
 ****************************************


 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 111 and contact element type 111 has been set up.  The
 companion pair has real constant set ID 112.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.69627E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.57449E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.67038E-02
 Average contact pair depth                   0.57449E-02
 Average target surface length                0.29186E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.14362E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Min.  Initial gap 4.991010041E-04 was detected between contact element
 27725 and target element 27758.
 Contact is detected due to initial settings.

 Max.  Geometric gap 6.608405872E-04 has been detected between contact
 element 27739 and target element 27761.
 ****************************************


 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 112 and contact element type 111 has been set up.  The
 companion pair has real constant set ID 111.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.69627E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.18117E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.29027E-02
 Average contact pair depth                   0.18117E-02
 Average target surface length                0.64033E-02
 Default pinball region factor PINB           0.25000
 *WARNING*: The default pinball radius may be too small to capture
 contacting zone under small sliding assumption.  Redefine the pinball
 radius if necessary.
 The resulting pinball region                 0.45292E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 No contact was detected for this contact pair.
 ****************************************


 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 113 and contact element type 113 has been set up.  The
 companion pair has real constant set ID 114.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.61490E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.65051E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.85897E-02
 Average contact pair depth                   0.65051E-02
 Average target surface length                0.91866E-02
 Default pinball region factor PINB           0.25000
 *WARNING*: The default pinball radius may be too small to capture
 contacting zone under small sliding assumption.  Redefine the pinball
 radius if necessary.
 The resulting pinball region                 0.16263E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Min.  Initial gap 4.880394923E-04 was detected between contact element
 27801 and target element 27832.
 Contact is detected due to initial settings.

 Max.  Geometric gap 1.434448592E-03 has been detected between contact
 element 27805 and target element 27836.
 *WARNING*: The geometric gap/penetration may be too large.  Increase
 pinball radius if it is a true geometric gap/penetration.  Decrease
 pinball if it is a false one.
 ****************************************


 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 114 and contact element type 113 has been set up.  The
 companion pair has real constant set ID 113.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.61490E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.60082E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.94798E-02
 Average contact pair depth                   0.60082E-02
 Average target surface length                0.81950E-02
 Default pinball region factor PINB           0.25000
 *WARNING*: The default pinball radius may be too small to capture
 contacting zone under small sliding assumption.  Redefine the pinball
 radius if necessary.
 The resulting pinball region                 0.15020E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Min.  Initial gap 4.731531561E-04 was detected between contact element
 27820 and target element 27784.
 Contact is detected due to initial settings.

 Max.  Geometric gap 1.388433726E-03 has been detected between contact
 element 27816 and target element 27781.
 *WARNING*: The geometric gap/penetration may be too large.  Increase
 pinball radius if it is a true geometric gap/penetration.  Decrease
 pinball if it is a false one.
 ****************************************


 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 115 and contact element type 115 has been set up.  The
 companion pair has real constant set ID 116.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.47825E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.83639E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.10096E-01
 Average contact pair depth                   0.83639E-02
 Average target surface length                0.88240E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.20910E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Min.  Initial gap 4.765227832E-04 was detected between contact element
 27873 and target element 27905.
 Contact is detected due to initial settings.

 Max.  Geometric gap 5.425881594E-04 has been detected between contact
 element 27877 and target element 27898.
 ****************************************


 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 116 and contact element type 115 has been set up.  The
 companion pair has real constant set ID 115.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.47825E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.60268E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.91068E-02
 Average contact pair depth                   0.60268E-02
 Average target surface length                0.95876E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.15067E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Min.  Initial gap 4.628556431E-04 was detected between contact element
 27892 and target element 27855.
 Contact is detected due to initial settings.

 Max.  Geometric gap 5.876189201E-04 has been detected between contact
 element 27883 and target element 27844.
 ****************************************


 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 117 and contact element type 117 has been set up.  The
 companion pair has real constant set ID 118.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.99659E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.40137E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.64333E-02
 Average contact pair depth                   0.40137E-02
 Average target surface length                0.35009E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.10034E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Min.  Initial gap 4.990860243E-04 was detected between contact element
 27953 and target element 27996.
 Contact is detected due to initial settings.

 Max.  Geometric gap 6.054222446E-04 has been detected between contact
 element 27959 and target element 27998.
 *WARNING*: The geometric gap/penetration may be too large.  Increase
 pinball radius if it is a true geometric gap/penetration.  Decrease
 pinball if it is a false one.
 ****************************************


 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 118 and contact element type 117 has been set up.  The
 companion pair has real constant set ID 117.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.99659E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.19156E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.34841E-02
 Average contact pair depth                   0.19156E-02
 Average target surface length                0.59569E-02
 Default pinball region factor PINB           0.25000
 *WARNING*: The default pinball radius may be too small to capture
 contacting zone under small sliding assumption.  Redefine the pinball
 radius if necessary.
 The resulting pinball region                 0.47891E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 No contact was detected for this contact pair.
 ****************************************


 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 119 and contact element type 119 has been set up.  The
 companion pair has real constant set ID 120.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.59135E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.67641E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.11896E-01
 Average contact pair depth                   0.67641E-02
 Average target surface length                0.91805E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.16910E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Min.  Initial gap 4.616567429E-04 was detected between contact element
 28027 and target element 28062.
 Contact is detected due to initial settings.

 Max.  Geometric gap 5.329327707E-04 has been detected between contact
 element 28024 and target element 28058.
 ****************************************


 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 120 and contact element type 119 has been set up.  The
 companion pair has real constant set ID 119.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.59135E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.59744E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.94747E-02
 Average contact pair depth                   0.59744E-02
 Average target surface length                0.11153E-01
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.14936E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Min.  Initial gap 4.459523403E-04 was detected between contact element
 28050 and target element 28007.
 Contact is detected due to initial settings.

 Max.  Geometric gap 5.450774883E-04 has been detected between contact
 element 28046 and target element 28004.
 ****************************************


 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 121 and contact element type 121 has been set up.  The
 companion pair has real constant set ID 122.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.49021E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.65732E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.10900E-01
 Average contact pair depth                   0.65732E-02
 Average target surface length                0.91805E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.16433E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Min.  Initial gap 4.598042426E-04 was detected between contact element
 28100 and target element 28129.
 Contact is detected due to initial settings.

 Max.  Geometric gap 4.987714614E-04 has been detected between contact
 element 28102 and target element 28118.
 ****************************************


 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 122 and contact element type 121 has been set up.  The
 companion pair has real constant set ID 121.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.49021E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.81597E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.94747E-02
 Average contact pair depth                   0.81597E-02
 Average target surface length                0.10212E-01
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.20399E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Min.  Initial gap 4.494279709E-04 was detected between contact element
 28117 and target element 28079.
 Contact is detected due to initial settings.

 Max.  Geometric gap 5.946212391E-04 has been detected between contact
 element 28114 and target element 28070.
 ****************************************


 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 123 and contact element type 123 has been set up.  The
 companion pair has real constant set ID 124.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.52305E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.22691E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.36454E-02
 Average contact pair depth                   0.22691E-02
 Average target surface length                0.12050E-01
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.56728E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Max.  Initial penetration 6.938893904E-18 was detected between contact
 element 28142 and target element 28170.
 ****************************************


 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 124 and contact element type 123 has been set up.  The
 companion pair has real constant set ID 123.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.52305E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.76475E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.12431E-01
 Average contact pair depth                   0.76475E-02
 Average target surface length                0.37691E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.19119E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Max.  Initial penetration 6.938893904E-18 was detected between contact
 element 28159 and target element 28134.
 ****************************************


 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 125 and contact element type 125 has been set up.  The
 companion pair has real constant set ID 126.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.66769E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.24261E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.36454E-02
 Average contact pair depth                   0.24261E-02
 Average target surface length                0.11869E-01
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.60652E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Max.  Initial penetration 3.469446952E-18 was detected between contact
 element 28199 and target element 28219.
 ****************************************


 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 126 and contact element type 125 has been set up.  The
 companion pair has real constant set ID 125.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.66769E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.59908E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.12246E-01
 Average contact pair depth                   0.59908E-02
 Average target surface length                0.37691E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.14977E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Max.  Initial penetration 3.469446952E-18 was detected between contact
 element 28205 and target element 28186.
 ****************************************


 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 127 and contact element type 127 has been set up.  The
 companion pair has real constant set ID 128.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.48217E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.22750E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.36454E-02
 Average contact pair depth                   0.22750E-02
 Average target surface length                0.10279E-01
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.56876E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Max.  Initial penetration 1.736955052E-04 was detected between contact
 element 28253 and target element 28272.
 You may move entire target surface by : x= -8.197647376E-20, y=
 -1.736955052E-04, z= -5.340808408E-20,to reduce initial penetration.
 ****************************************


 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 128 and contact element type 127 has been set up.  The
 companion pair has real constant set ID 127.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.48217E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.82959E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.10684E-01
 Average contact pair depth                   0.82959E-02
 Average target surface length                0.37691E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.20740E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Max.  Initial penetration 6.195620121E-05 was detected between contact
 element 28255 and target element 28241.
 You may move entire target surface by : x= 8.98413284E-06, y=
 6.129957E-05, z= 4.679138581E-07,to reduce initial penetration.
 ****************************************


 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 129 and contact element type 129 has been set up.  The
 companion pair has real constant set ID 130.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.59273E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.24261E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.36454E-02
 Average contact pair depth                   0.24261E-02
 Average target surface length                0.12056E-01
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.60652E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Max.  Initial penetration 2.775557562E-17 was detected between contact
 element 28305 and target element 28329.
 ****************************************


 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 130 and contact element type 129 has been set up.  The
 companion pair has real constant set ID 129.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.59273E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.67485E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.12438E-01
 Average contact pair depth                   0.67485E-02
 Average target surface length                0.37691E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.16871E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Max.  Initial penetration 5.551115123E-17 was detected between contact
 element 28315 and target element 28292.
 ****************************************


 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 131 and contact element type 131 has been set up.  The
 companion pair has real constant set ID 132.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.16371E+17
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.24434E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.30579E-02
 Average contact pair depth                   0.24434E-02
 Average target surface length                0.30914E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.61085E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Min.  Initial gap 4.879144707E-04 was detected between contact element
 28485 and target element 28688.
 Contact is detected due to initial settings.

 Max.  Geometric gap 6.001E-04 has been detected between contact element
 28514 and target element 28698.
 *WARNING*: The geometric gap/penetration may be too large.  Increase
 pinball radius if it is a true geometric gap/penetration.  Decrease
 pinball if it is a false one.
 ****************************************


 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 132 and contact element type 131 has been set up.  The
 companion pair has real constant set ID 131.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.16371E+17
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.22155E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.32181E-02
 Average contact pair depth                   0.22155E-02
 Average target surface length                0.29474E-02
 Default pinball region factor PINB           0.25000
 *WARNING*: The default pinball radius may be too small to capture
 contacting zone under small sliding assumption.  Redefine the pinball
 radius if necessary.
 The resulting pinball region                 0.55386E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Min.  Initial gap 4.913508331E-04 was detected between contact element
 28594 and target element 28375.
 Contact is detected due to initial settings.

 Max.  Geometric gap 5.057078782E-04 has been detected between contact
 element 28577 and target element 28376.
 *WARNING*: The geometric gap/penetration may be too large.  Increase
 pinball radius if it is a true geometric gap/penetration.  Decrease
 pinball if it is a false one.
 ****************************************


 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 133 and contact element type 133 has been set up.  The
 companion pair has real constant set ID 134.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.93276E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.42884E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.45003E-02
 Average contact pair depth                   0.42884E-02
 Average target surface length                0.28005E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.10721E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Min.  Initial gap 4.890477239E-04 was detected between contact element
 28820 and target element 28896.
 Contact is detected due to initial settings.

 Max.  Geometric gap 5.056590656E-04 has been detected between contact
 element 28812 and target element 28891.
 ****************************************


 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 134 and contact element type 133 has been set up.  The
 companion pair has real constant set ID 133.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.93276E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.21278E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.28894E-02
 Average contact pair depth                   0.21278E-02
 Average target surface length                0.43589E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.53196E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Min.  Initial gap 4.900971609E-04 was detected between contact element
 28862 and target element 28755.
 Contact is detected due to initial settings.

 Max.  Geometric gap 5.07768796E-04 has been detected between contact
 element 28856 and target element 28765.
 *WARNING*: The geometric gap/penetration may be too large.  Increase
 pinball radius if it is a true geometric gap/penetration.  Decrease
 pinball if it is a false one.
 ****************************************


 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 135 and contact element type 135 has been set up.  The
 companion pair has real constant set ID 136.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.52236E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.47792E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.58138E-02
 Average contact pair depth                   0.47792E-02
 Average target surface length                0.14537E-01
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.11948E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Min.  Initial gap 4.666536896E-04 was detected between contact element
 28998 and target element 29066.
 Contact is detected due to initial settings.

 Max.  Geometric gap 1.044318799E-03 has been detected between contact
 element 29029 and target element 29067.
 *WARNING*: The geometric gap/penetration may be too large.  Increase
 pinball radius if it is a true geometric gap/penetration.  Decrease
 pinball if it is a false one.
 ****************************************


 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 136 and contact element type 135 has been set up.  The
 companion pair has real constant set ID 135.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.52236E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.76575E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.15620E-01
 Average contact pair depth                   0.76575E-02
 Average target surface length                0.56598E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.19144E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Min.  Initial gap 4.662224708E-04 was detected between contact element
 29055 and target element 28948.
 Contact is detected due to initial settings.

 Max.  Geometric gap 1.009698691E-03 has been detected between contact
 element 29058 and target element 28957.
 *WARNING*: The geometric gap/penetration may be too large.  Increase
 pinball radius if it is a true geometric gap/penetration.  Decrease
 pinball if it is a false one.
 ****************************************


 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 137 and contact element type 137 has been set up.  The
 companion pair has real constant set ID 138.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.47172E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.36190E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.48409E-02
 Average contact pair depth                   0.36190E-02
 Average target surface length                0.14537E-01
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.90475E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Min.  Initial gap 4.661935734E-04 was detected between contact element
 29232 and target element 29293.
 Contact is detected due to initial settings.

 Max.  Geometric gap 4.917324487E-04 has been detected between contact
 element 29229 and target element 29288.
 *WARNING*: The geometric gap/penetration may be too large.  Increase
 pinball radius if it is a true geometric gap/penetration.  Decrease
 pinball if it is a false one.
 ****************************************


 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 138 and contact element type 137 has been set up.  The
 companion pair has real constant set ID 137.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.47172E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.84797E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.15620E-01
 Average contact pair depth                   0.84797E-02
 Average target surface length                0.47202E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.21199E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Min.  Initial gap 4.662654477E-04 was detected between contact element
 29272 and target element 29132.
 Contact is detected due to initial settings.

 Max.  Geometric gap 4.863963432E-04 has been detected between contact
 element 29277 and target element 29143.
 ****************************************


 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 139 and contact element type 139 has been set up.  The
 companion pair has real constant set ID 140.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.55911E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.24430E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.67716E-02
 Average contact pair depth                   0.24430E-02
 Average target surface length                0.13775E-01
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.61076E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Max.  Initial penetration 3.469446952E-18 was detected between contact
 element 29317 and target element 29358.
 ****************************************


 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 140 and contact element type 139 has been set up.  The
 companion pair has real constant set ID 139.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.55911E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.71543E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.14111E-01
 Average contact pair depth                   0.71543E-02
 Average target surface length                0.67254E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.17886E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Max.  Initial penetration 3.469446952E-18 was detected between contact
 element 29329 and target element 29309.
 ****************************************


 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 141 and contact element type 141 has been set up.  The
 companion pair has real constant set ID 142.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.34840E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.23792E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.67716E-02
 Average contact pair depth                   0.23792E-02
 Average target surface length                0.12803E-01
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.59479E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Max.  Initial penetration 1.106700545E-04 was detected between contact
 element 29385 and target element 29419.
 You may move entire target surface by : x= 1.698393613E-20, y=
 -1.106700545E-04, z= 1.940768735E-21,to reduce initial penetration.
 ****************************************


 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 142 and contact element type 141 has been set up.  The
 companion pair has real constant set ID 141.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.34840E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.11481E-02
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.13407E-01
 Average contact pair depth                   0.11481E-01
 Average target surface length                0.67254E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.28702E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      14.719   TIME= 07:41:35
 Max.  Initial penetration 1.113237698E-04 was detected between contact
 element 29394 and target element 29368.
 You may move entire target surface by : x= 6.753189682E-07, y=
 1.0932821E-04, z= 2.097303449E-05,to reduce initial penetration.
 ****************************************


 *** WARNING ***                         CP =      14.719   TIME= 07:41:35
 Maximum contact stiffness 1.759623794E+16 is too big which can cause an
 accuracy problem, you may scale the force units in the model.





     D I S T R I B U T E D   D O M A I N   D E C O M P O S E R

  ...Number of elements: 20256
  ...Number of nodes:    30685
  ...Decompose to 2 CPU domains
  ...Element load balance ratio =     1.042


                      L O A D   S T E P   O P T I O N S

   LOAD STEP NUMBER. . . . . . . . . . . . . . . .     1
   TIME AT END OF THE LOAD STEP. . . . . . . . . .  1.0000
   NUMBER OF SUBSTEPS. . . . . . . . . . . . . . .     1
   STEP CHANGE BOUNDARY CONDITIONS . . . . . . . .    NO
   PRINT OUTPUT CONTROLS . . . . . . . . . . . . .NO PRINTOUT
   DATABASE OUTPUT CONTROLS
      ITEM     FREQUENCY   COMPONENT
       ALL       NONE
      NSOL        ALL
      RSOL        ALL
      EANG        ALL
      ETMP        ALL
      VENG        ALL
      STRS        ALL
      EPEL        ALL
      EPPL        ALL
      EPTH        ALL
      CONT        ALL


 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr

 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 55 and contact element type 55 has been set up.  The
 companion pair has real constant set ID 56.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.17596E+17
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.22732E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.31042E-02
 Average contact pair depth                   0.22732E-02
 Average target surface length                0.30935E-02
 Default pinball region factor PINB           0.25000
 *WARNING*: The default pinball radius may be too small to capture
 contacting zone under small sliding assumption.  Redefine the pinball
 radius if necessary.
 The resulting pinball region                 0.56830E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Min.  Initial gap 4.892041643E-04 was detected between contact element
 24597 and target element 24797.
 Contact is detected due to initial settings.

 Max.  Geometric gap 5.108346823E-04 has been detected between contact
 element 24608 and target element 24805.
 *WARNING*: The geometric gap/penetration may be too large.  Increase
 pinball radius if it is a true geometric gap/penetration.  Decrease
 pinball if it is a false one.
 ****************************************


 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 56 and contact element type 55 has been set up.  The
 companion pair has real constant set ID 55.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.17596E+17
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.22155E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.32205E-02
 Average contact pair depth                   0.22155E-02
 Average target surface length                0.29897E-02
 Default pinball region factor PINB           0.25000
 *WARNING*: The default pinball radius may be too small to capture
 contacting zone under small sliding assumption.  Redefine the pinball
 radius if necessary.
 The resulting pinball region                 0.55388E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Min.  Initial gap 4.914598591E-04 was detected between contact element
 24703 and target element 24481.
 Contact is detected due to initial settings.

 Max.  Geometric gap 5.103830541E-04 has been detected between contact
 element 24711 and target element 24504.
 *WARNING*: The geometric gap/penetration may be too large.  Increase
 pinball radius if it is a true geometric gap/penetration.  Decrease
 pinball if it is a false one.
 ****************************************


 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 57 and contact element type 57 has been set up.  The
 companion pair has real constant set ID 58.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.10201E+17
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.39212E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.46042E-02
 Average contact pair depth                   0.39212E-02
 Average target surface length                0.28864E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.98030E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Min.  Initial gap 4.910065956E-04 was detected between contact element
 24874 and target element 24952.
 Contact is detected due to initial settings.

 Max.  Geometric gap 5.061191669E-04 has been detected between contact
 element 24876 and target element 24950.
 *WARNING*: The geometric gap/penetration may be too large.  Increase
 pinball radius if it is a true geometric gap/penetration.  Decrease
 pinball if it is a false one.
 ****************************************


 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 58 and contact element type 57 has been set up.  The
 companion pair has real constant set ID 57.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.10201E+17
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.25334E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.29829E-02
 Average contact pair depth                   0.25334E-02
 Average target surface length                0.44708E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.63336E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Min.  Initial gap 4.920431168E-04 was detected between contact element
 24917 and target element 24833.
 Contact is detected due to initial settings.

 Max.  Geometric gap 5.061138968E-04 has been detected between contact
 element 24909 and target element 24836.
 *WARNING*: The geometric gap/penetration may be too large.  Increase
 pinball radius if it is a true geometric gap/penetration.  Decrease
 pinball if it is a false one.
 ****************************************


 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 61 and contact element type 61 has been set up.  The
 companion pair has real constant set ID 62.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.51152E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.33229E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.49022E-02
 Average contact pair depth                   0.33229E-02
 Average target surface length                0.14531E-01
 Default pinball region factor PINB           0.25000
 *WARNING*: The default pinball radius may be too small to capture
 contacting zone under small sliding assumption.  Redefine the pinball
 radius if necessary.
 The resulting pinball region                 0.83073E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Min.  Initial gap 2.598040708E-04 was detected between contact element
 25254 and target element 25302.
 Contact is detected due to initial settings.

 Max.  Geometric gap 6.188006116E-04 has been detected between contact
 element 25275 and target element 25298.
 *WARNING*: The geometric gap/penetration may be too large.  Increase
 pinball radius if it is a true geometric gap/penetration.  Decrease
 pinball if it is a false one.
 ****************************************


 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 62 and contact element type 61 has been set up.  The
 companion pair has real constant set ID 61.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.51152E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.78199E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.15617E-01
 Average contact pair depth                   0.78199E-02
 Average target surface length                0.47793E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.19550E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Min.  Initial gap 2.739881357E-04 was detected between contact element
 25290 and target element 25174.
 Contact is detected due to initial settings.

 Max.  Geometric gap 5.011163479E-04 has been detected between contact
 element 25283 and target element 25162.
 ****************************************


 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 65 and contact element type 65 has been set up.  The
 companion pair has real constant set ID 66.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.47822E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.22750E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.36454E-02
 Average contact pair depth                   0.22750E-02
 Average target surface length                0.98585E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.56876E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Max.  Initial penetration 1.736955052E-04 was detected between contact
 element 25361 and target element 25388.
 You may move entire target surface by : x= 2.91539766E-20, y=
 -1.736955052E-04, z= -3.343422002E-20,to reduce initial penetration.
 ****************************************


 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 66 and contact element type 65 has been set up.  The
 companion pair has real constant set ID 65.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.47822E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.83643E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.10201E-01
 Average contact pair depth                   0.83643E-02
 Average target surface length                0.37691E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.20911E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Max.  Initial penetration 6.195620121E-05 was detected between contact
 element 25372 and target element 25349.
 You may move entire target surface by : x= -8.98413284E-06, y=
 6.129957E-05, z= 4.679138581E-07,to reduce initial penetration.
 ****************************************


 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 69 and contact element type 69 has been set up.  The
 companion pair has real constant set ID 70.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.37743E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.24103E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.67716E-02
 Average contact pair depth                   0.24103E-02
 Average target surface length                0.12921E-01
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.60258E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Max.  Initial penetration 1.021405789E-04 was detected between contact
 element 25492 and target element 25546.
 You may move entire target surface by : x= 3.178767662E-19, y=
 1.021405789E-04, z= -4.486295031E-19,to reduce initial penetration.
 ****************************************


 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 70 and contact element type 69 has been set up.  The
 companion pair has real constant set ID 69.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.37743E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.10598E-02
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.13550E-01
 Average contact pair depth                   0.10598E-01
 Average target surface length                0.67254E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.26495E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Max.  Initial penetration 7.29363013E-05 was detected between contact
 element 25520 and target element 25475.
 You may move entire target surface by : x= -4.791479912E-07, y=
 -7.201771111E-05, z= 1.152925631E-05,to reduce initial penetration.
 ****************************************


 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 73 and contact element type 73 has been set up.  The
 companion pair has real constant set ID 74.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.48536E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.21852E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.36454E-02
 Average contact pair depth                   0.21852E-02
 Average target surface length                0.96458E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.54630E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Max.  Initial penetration 1.736954878E-04 was detected between contact
 element 25627 and target element 25656.
 You may move entire target surface by : x= -1.162760459E-18, y=
 1.736954878E-04, z= 1.256153359E-18,to reduce initial penetration.
 ****************************************


 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 74 and contact element type 73 has been set up.  The
 companion pair has real constant set ID 73.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.48536E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.82412E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.99777E-02
 Average contact pair depth                   0.82412E-02
 Average target surface length                0.37691E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.20603E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Max.  Initial penetration 6.195620923E-05 was detected between contact
 element 25639 and target element 25615.
 You may move entire target surface by : x= -8.984135126E-06, y=
 -6.129957778E-05, z= 4.679135334E-07,to reduce initial penetration.
 ****************************************


 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 75 and contact element type 75 has been set up.  The
 companion pair has real constant set ID 76.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.10596E+17
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.37750E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.57784E-02
 Average contact pair depth                   0.37750E-02
 Average target surface length                0.35009E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.94375E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Min.  Initial gap 4.990860284E-04 was detected between contact element
 25711 and target element 25754.
 Contact is detected due to initial settings.

 Max.  Geometric gap 6.638924593E-04 has been detected between contact
 element 25716 and target element 25755.
 *WARNING*: The geometric gap/penetration may be too large.  Increase
 pinball radius if it is a true geometric gap/penetration.  Decrease
 pinball if it is a false one.
 ****************************************


 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 76 and contact element type 75 has been set up.  The
 companion pair has real constant set ID 75.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.10596E+17
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.19156E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.34841E-02
 Average contact pair depth                   0.19156E-02
 Average target surface length                0.53755E-02
 Default pinball region factor PINB           0.25000
 *WARNING*: The default pinball radius may be too small to capture
 contacting zone under small sliding assumption.  Redefine the pinball
 radius if necessary.
 The resulting pinball region                 0.47891E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 No contact was detected for this contact pair.
 ****************************************


 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 81 and contact element type 81 has been set up.  The
 companion pair has real constant set ID 82.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.60222E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.57913E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.98935E-02
 Average contact pair depth                   0.57913E-02
 Average target surface length                0.86839E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.14478E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Min.  Initial gap 4.441485883E-04 was detected between contact element
 25912 and target element 25935.
 Contact is detected due to initial settings.

 Max.  Geometric gap 5.632278433E-04 has been detected between contact
 element 25913 and target element 25938.
 ****************************************


 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 82 and contact element type 81 has been set up.  The
 companion pair has real constant set ID 81.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.60222E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.66421E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.88969E-02
 Average contact pair depth                   0.66421E-02
 Average target surface length                0.92954E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.16605E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Min.  Initial gap 4.294073687E-04 was detected between contact element
 25923 and target element 25890.
 Contact is detected due to initial settings.

 Max.  Geometric gap 6.261542594E-04 has been detected between contact
 element 25925 and target element 25884.
 ****************************************


 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 83 and contact element type 83 has been set up.  The
 companion pair has real constant set ID 84.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.60735E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.22691E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.36454E-02
 Average contact pair depth                   0.22691E-02
 Average target surface length                0.11876E-01
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.56728E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Max.  Initial penetration 5.551115123E-17 was detected between contact
 element 25963 and target element 25989.
 ****************************************


 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 84 and contact element type 83 has been set up.  The
 companion pair has real constant set ID 83.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.60735E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.65860E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.12255E-01
 Average contact pair depth                   0.65860E-02
 Average target surface length                0.37691E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.16465E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Max.  Initial penetration 8.326672685E-17 was detected between contact
 element 25972 and target element 25946.
 ****************************************


 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 85 and contact element type 85 has been set up.  The
 companion pair has real constant set ID 86.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.53384E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.22750E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.36454E-02
 Average contact pair depth                   0.22750E-02
 Average target surface length                0.10238E-01
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.56876E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Max.  Initial penetration 1.736954878E-04 was detected between contact
 element 26009 and target element 26050.
 You may move entire target surface by : x= 1.054076711E-18, y=
 1.736954878E-04, z= 1.298304891E-18,to reduce initial penetration.
 ****************************************


 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 86 and contact element type 85 has been set up.  The
 companion pair has real constant set ID 85.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.53384E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.74929E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.10632E-01
 Average contact pair depth                   0.74929E-02
 Average target surface length                0.37691E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.18732E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Max.  Initial penetration 6.195620924E-05 was detected between contact
 element 26033 and target element 25997.
 You may move entire target surface by : x= 8.984135126E-06, y=
 -6.129957778E-05, z= 4.679135334E-07,to reduce initial penetration.
 ****************************************


 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 87 and contact element type 87 has been set up.  The
 companion pair has real constant set ID 88.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.94595E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.42286E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.57472E-02
 Average contact pair depth                   0.42286E-02
 Average target surface length                0.37019E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.10571E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Min.  Initial gap 4.990834106E-04 was detected between contact element
 26104 and target element 26139.
 Contact is detected due to initial settings.

 Max.  Geometric gap 6.97250943E-04 has been detected between contact
 element 26113 and target element 26137.
 *WARNING*: The geometric gap/penetration may be too large.  Increase
 pinball radius if it is a true geometric gap/penetration.  Decrease
 pinball if it is a false one.
 ****************************************


 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 88 and contact element type 87 has been set up.  The
 companion pair has real constant set ID 87.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.94595E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.24192E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.35975E-02
 Average contact pair depth                   0.24192E-02
 Average target surface length                0.54068E-02
 Default pinball region factor PINB           0.25000
 *WARNING*: The default pinball radius may be too small to capture
 contacting zone under small sliding assumption.  Redefine the pinball
 radius if necessary.
 The resulting pinball region                 0.60481E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Min.  Initial gap 4.991700363E-04 was detected between contact element
 26127 and target element 26073.
 Contact is detected due to initial settings.

 Max.  Geometric gap 6.001E-04 has been detected between contact element
 26117 and target element 26061.
 *WARNING*: The geometric gap/penetration may be too large.  Increase
 pinball radius if it is a true geometric gap/penetration.  Decrease
 pinball if it is a false one.
 ****************************************


 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 93 and contact element type 93 has been set up.  The
 companion pair has real constant set ID 94.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.17429E+17
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.22950E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.31471E-02
 Average contact pair depth                   0.22950E-02
 Average target surface length                0.30838E-02
 Default pinball region factor PINB           0.25000
 *WARNING*: The default pinball radius may be too small to capture
 contacting zone under small sliding assumption.  Redefine the pinball
 radius if necessary.
 The resulting pinball region                 0.57376E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Min.  Initial gap 4.918864337E-04 was detected between contact element
 26465 and target element 26665.
 Contact is detected due to initial settings.

 Max.  Geometric gap 5.046381826E-04 has been detected between contact
 element 26460 and target element 26660.
 *WARNING*: The geometric gap/penetration may be too large.  Increase
 pinball radius if it is a true geometric gap/penetration.  Decrease
 pinball if it is a false one.
 ****************************************


 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 94 and contact element type 93 has been set up.  The
 companion pair has real constant set ID 93.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.17429E+17
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.22169E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.32086E-02
 Average contact pair depth                   0.22169E-02
 Average target surface length                0.30320E-02
 Default pinball region factor PINB           0.25000
 *WARNING*: The default pinball radius may be too small to capture
 contacting zone under small sliding assumption.  Redefine the pinball
 radius if necessary.
 The resulting pinball region                 0.55424E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Min.  Initial gap 4.910400799E-04 was detected between contact element
 26570 and target element 26362.
 Contact is detected due to initial settings.

 Max.  Geometric gap 5.057185782E-04 has been detected between contact
 element 26554 and target element 26357.
 *WARNING*: The geometric gap/penetration may be too large.  Increase
 pinball radius if it is a true geometric gap/penetration.  Decrease
 pinball if it is a false one.
 ****************************************


 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 97 and contact element type 97 has been set up.  The
 companion pair has real constant set ID 98.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.31133E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.24430E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.67716E-02
 Average contact pair depth                   0.24430E-02
 Average target surface length                0.19342E-01
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.61076E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Max.  Initial penetration 2.775557562E-17 was detected between contact
 element 26842 and target element 26873.
 ****************************************


 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 98 and contact element type 97 has been set up.  The
 companion pair has real constant set ID 97.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.31133E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.12848E-02
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.20130E-01
 Average contact pair depth                   0.12848E-01
 Average target surface length                0.67254E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.32120E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Max.  Initial penetration 0 was detected between contact element 26862
 and target element 26829.
 ****************************************


 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 105 and contact element type 105 has been set up.  The
 companion pair has real constant set ID 106.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.33684E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.23981E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.67716E-02
 Average contact pair depth                   0.23981E-02
 Average target surface length                0.19342E-01
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.59952E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Max.  Initial penetration 2.775557562E-17 was detected between contact
 element 27518 and target element 27550.
 ****************************************


 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 106 and contact element type 105 has been set up.  The
 companion pair has real constant set ID 105.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.33684E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.11875E-02
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.20130E-01
 Average contact pair depth                   0.11875E-01
 Average target surface length                0.67254E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.29687E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Max.  Initial penetration 0 was detected between contact element 27532
 and target element 27502.
 ****************************************


 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 113 and contact element type 113 has been set up.  The
 companion pair has real constant set ID 114.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.61490E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.65051E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.85897E-02
 Average contact pair depth                   0.65051E-02
 Average target surface length                0.91866E-02
 Default pinball region factor PINB           0.25000
 *WARNING*: The default pinball radius may be too small to capture
 contacting zone under small sliding assumption.  Redefine the pinball
 radius if necessary.
 The resulting pinball region                 0.16263E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Min.  Initial gap 4.880394923E-04 was detected between contact element
 27801 and target element 27832.
 Contact is detected due to initial settings.

 Max.  Geometric gap 1.434448592E-03 has been detected between contact
 element 27805 and target element 27836.
 *WARNING*: The geometric gap/penetration may be too large.  Increase
 pinball radius if it is a true geometric gap/penetration.  Decrease
 pinball if it is a false one.
 ****************************************


 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 114 and contact element type 113 has been set up.  The
 companion pair has real constant set ID 113.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.61490E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.60082E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.94798E-02
 Average contact pair depth                   0.60082E-02
 Average target surface length                0.81950E-02
 Default pinball region factor PINB           0.25000
 *WARNING*: The default pinball radius may be too small to capture
 contacting zone under small sliding assumption.  Redefine the pinball
 radius if necessary.
 The resulting pinball region                 0.15020E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Min.  Initial gap 4.731531561E-04 was detected between contact element
 27820 and target element 27784.
 Contact is detected due to initial settings.

 Max.  Geometric gap 1.388433726E-03 has been detected between contact
 element 27816 and target element 27781.
 *WARNING*: The geometric gap/penetration may be too large.  Increase
 pinball radius if it is a true geometric gap/penetration.  Decrease
 pinball if it is a false one.
 ****************************************


 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 115 and contact element type 115 has been set up.  The
 companion pair has real constant set ID 116.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.47825E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.83639E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.10096E-01
 Average contact pair depth                   0.83639E-02
 Average target surface length                0.88240E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.20910E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Min.  Initial gap 4.765227832E-04 was detected between contact element
 27873 and target element 27905.
 Contact is detected due to initial settings.

 Max.  Geometric gap 5.425881594E-04 has been detected between contact
 element 27877 and target element 27898.
 ****************************************


 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 116 and contact element type 115 has been set up.  The
 companion pair has real constant set ID 115.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.47825E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.60268E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.91068E-02
 Average contact pair depth                   0.60268E-02
 Average target surface length                0.95876E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.15067E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Min.  Initial gap 4.628556431E-04 was detected between contact element
 27892 and target element 27855.
 Contact is detected due to initial settings.

 Max.  Geometric gap 5.876189201E-04 has been detected between contact
 element 27883 and target element 27844.
 ****************************************


 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 117 and contact element type 117 has been set up.  The
 companion pair has real constant set ID 118.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.99659E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.40137E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.64333E-02
 Average contact pair depth                   0.40137E-02
 Average target surface length                0.35009E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.10034E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Min.  Initial gap 4.990860243E-04 was detected between contact element
 27953 and target element 27996.
 Contact is detected due to initial settings.

 Max.  Geometric gap 6.054222446E-04 has been detected between contact
 element 27959 and target element 27998.
 *WARNING*: The geometric gap/penetration may be too large.  Increase
 pinball radius if it is a true geometric gap/penetration.  Decrease
 pinball if it is a false one.
 ****************************************


 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 118 and contact element type 117 has been set up.  The
 companion pair has real constant set ID 117.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.99659E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.19156E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.34841E-02
 Average contact pair depth                   0.19156E-02
 Average target surface length                0.59569E-02
 Default pinball region factor PINB           0.25000
 *WARNING*: The default pinball radius may be too small to capture
 contacting zone under small sliding assumption.  Redefine the pinball
 radius if necessary.
 The resulting pinball region                 0.47891E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 No contact was detected for this contact pair.
 ****************************************


 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 119 and contact element type 119 has been set up.  The
 companion pair has real constant set ID 120.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.59135E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.67641E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.11896E-01
 Average contact pair depth                   0.67641E-02
 Average target surface length                0.91805E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.16910E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Min.  Initial gap 4.616567429E-04 was detected between contact element
 28027 and target element 28062.
 Contact is detected due to initial settings.

 Max.  Geometric gap 5.329327707E-04 has been detected between contact
 element 28024 and target element 28058.
 ****************************************


 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 120 and contact element type 119 has been set up.  The
 companion pair has real constant set ID 119.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.59135E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.59744E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.94747E-02
 Average contact pair depth                   0.59744E-02
 Average target surface length                0.11153E-01
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.14936E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Min.  Initial gap 4.459523403E-04 was detected between contact element
 28050 and target element 28007.
 Contact is detected due to initial settings.

 Max.  Geometric gap 5.450774883E-04 has been detected between contact
 element 28046 and target element 28004.
 ****************************************


 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 123 and contact element type 123 has been set up.  The
 companion pair has real constant set ID 124.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.52305E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.22691E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.36454E-02
 Average contact pair depth                   0.22691E-02
 Average target surface length                0.12050E-01
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.56728E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Max.  Initial penetration 6.938893904E-18 was detected between contact
 element 28142 and target element 28170.
 ****************************************


 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 124 and contact element type 123 has been set up.  The
 companion pair has real constant set ID 123.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.52305E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.76475E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.12431E-01
 Average contact pair depth                   0.76475E-02
 Average target surface length                0.37691E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.19119E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Max.  Initial penetration 6.938893904E-18 was detected between contact
 element 28159 and target element 28134.
 ****************************************


 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 125 and contact element type 125 has been set up.  The
 companion pair has real constant set ID 126.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.66769E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.24261E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.36454E-02
 Average contact pair depth                   0.24261E-02
 Average target surface length                0.11869E-01
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.60652E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Max.  Initial penetration 3.469446952E-18 was detected between contact
 element 28199 and target element 28219.
 ****************************************


 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 126 and contact element type 125 has been set up.  The
 companion pair has real constant set ID 125.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.66769E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.59908E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.12246E-01
 Average contact pair depth                   0.59908E-02
 Average target surface length                0.37691E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.14977E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Max.  Initial penetration 3.469446952E-18 was detected between contact
 element 28205 and target element 28186.
 ****************************************


 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 127 and contact element type 127 has been set up.  The
 companion pair has real constant set ID 128.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.48217E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.22750E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.36454E-02
 Average contact pair depth                   0.22750E-02
 Average target surface length                0.10279E-01
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.56876E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Max.  Initial penetration 1.736955052E-04 was detected between contact
 element 28253 and target element 28272.
 You may move entire target surface by : x= -8.197647376E-20, y=
 -1.736955052E-04, z= -5.340808408E-20,to reduce initial penetration.
 ****************************************


 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 128 and contact element type 127 has been set up.  The
 companion pair has real constant set ID 127.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.48217E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.82959E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.10684E-01
 Average contact pair depth                   0.82959E-02
 Average target surface length                0.37691E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.20740E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Max.  Initial penetration 6.195620121E-05 was detected between contact
 element 28255 and target element 28241.
 You may move entire target surface by : x= 8.98413284E-06, y=
 6.129957E-05, z= 4.679138581E-07,to reduce initial penetration.
 ****************************************


 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 129 and contact element type 129 has been set up.  The
 companion pair has real constant set ID 130.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.59273E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.24261E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.36454E-02
 Average contact pair depth                   0.24261E-02
 Average target surface length                0.12056E-01
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.60652E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Max.  Initial penetration 2.775557562E-17 was detected between contact
 element 28305 and target element 28329.
 ****************************************


 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 130 and contact element type 129 has been set up.  The
 companion pair has real constant set ID 129.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.59273E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.67485E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.12438E-01
 Average contact pair depth                   0.67485E-02
 Average target surface length                0.37691E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.16871E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Max.  Initial penetration 5.551115123E-17 was detected between contact
 element 28315 and target element 28292.
 ****************************************


 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 133 and contact element type 133 has been set up.  The
 companion pair has real constant set ID 134.  Both pairs should have
 the same behavior.
 ANSYS will deactivate the current pair and keep its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.93276E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.42884E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.45003E-02
 Average contact pair depth                   0.42884E-02
 Average target surface length                0.28005E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.10721E-02
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Min.  Initial gap 4.890477239E-04 was detected between contact element
 28820 and target element 28896.
 Contact is detected due to initial settings.

 Max.  Geometric gap 5.056590656E-04 has been detected between contact
 element 28812 and target element 28891.
 ****************************************


 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Symmetric Deformable- deformable contact pair identified by real
 constant set 134 and contact element type 133 has been set up.  The
 companion pair has real constant set ID 133.  Both pairs should have
 the same behavior.
 ANSYS will keep the current pair and deactivate its companion pair,
 resulting in asymmetric contact.
 Linear contact is defined
 Contact algorithm: Augmented Lagrange method
 Contact detection at: Gauss integration point
 Contact stiffness factor FKN                  10.000
 The resulting initial contact stiffness      0.93276E+16
 Default penetration tolerance factor FTOLN   0.10000
 The resulting penetration tolerance          0.21278E-03
 Default opening contact stiffness OPSF will be used.
 Default tangent stiffness factor FKT          1.0000
 Use constant contact stiffness
 Default Max. friction stress TAUMAX          0.10000E+21
 Average contact surface length               0.28894E-02
 Average contact pair depth                   0.21278E-02
 Average target surface length                0.43589E-02
 Default pinball region factor PINB           0.25000
 The resulting pinball region                 0.53196E-03
 Initial penetration/gap is excluded.
 Bonded contact (always) is defined.

 *** NOTE ***                            CP =      15.172   TIME= 07:41:35
 Min.  Initial gap 4.900971609E-04 was detected between contact element
 28862 and target element 28755.
 Contact is detected due to initial settings.

 Max.  Geometric gap 5.07768796E-04 has been detected between contact
 element 28856 and target element 28765.
 *WARNING*: The geometric gap/penetration may be too large.  Increase
 pinball radius if it is a true geometric gap/penetration.  Decrease
 pinball if it is a false one.
 ****************************************


 *WARNING*: The geometrical gap for certain contact pairs (e.g.  ID 56)
 may be too large.  Increase pinball if it is a true geometrical gap.
 Decrease pinball if it is a false one.

 *************************************************
  SUMMARY FOR CONTACT PAIR IDENTIFIED BY REAL CONSTANT SET          55

 *** NOTE ***                            CP =      16.391   TIME= 07:41:36
 Contact pair is inactive.

 *************************************************
  SUMMARY FOR CONTACT PAIR IDENTIFIED BY REAL CONSTANT SET          56
 Max.  Penetration of -1.683132053E-17 has been detected between contact
 element 24675 and target element 24462.

 Max.  Geometrical gap of 5.103830541E-04 has been detected between
 contact element 24711 and target element 24504.
 *WARNING*: The geometrical gap may be too large.  Increase pinball if
 it is a true geometrical gap.  Decrease pinball if it is a false one.
 For total 94 contact elements, there are 44 elements are in contact.
 There are 44 elements are in sticking.
 Contacting area 1.020843316E-04.
 Max.  Pinball distance 5.538828809E-04.
 One of the contact searching regions contains at least 22 target
 elements.
 Max.  Pressure/force -3.60799755.
 Max.  Normal stiffness 1.759623794E+16.
 Min.  Normal stiffness 1.759623794E+16.
 Max.  Tangential stiffness 9.078842251E+15.
 Min.  Tangential stiffness 9.078842251E+15.
 *************************************************

 *************************************************
  SUMMARY FOR CONTACT PAIR IDENTIFIED BY REAL CONSTANT SET          57

 *** NOTE ***                            CP =      16.391   TIME= 07:41:36
 Contact pair is inactive.

 *************************************************
  SUMMARY FOR CONTACT PAIR IDENTIFIED BY REAL CONSTANT SET          58
 Max.  Penetration of -1.515219216E-17 has been detected between contact
 element 24905 and target element 24810.

 Max.  Geometrical gap of 5.061138968E-04 has been detected between
 contact element 24909 and target element 24836.
 *WARNING*: The geometrical gap may be too large.  Increase pinball if
 it is a true geometrical gap.  Decrease pinball if it is a false one.
 For total 33 contact elements, there are 33 elements are in contact.
 There are 33 elements are in sticking.
 Contacting area 1.020835468E-04.
 Max.  Pinball distance 6.333571329E-04.
 One of the contact searching regions contains at least 11 target
 elements.
 Max.  Pressure/force -7.49757121.
 Max.  Normal stiffness 1.020099076E+16.
 Min.  Normal stiffness 1.020099076E+16.
 Max.  Tangential stiffness 6.497823499E+15.
 Min.  Tangential stiffness 6.497823499E+15.
 *************************************************

 *************************************************
  SUMMARY FOR CONTACT PAIR IDENTIFIED BY REAL CONSTANT SET          61
 Max.  Penetration of -9.558883959E-18 has been detected between contact
 element 25239 and target element 25305.

 Max.  Geometrical gap of 6.188006116E-04 has been detected between
 contact element 25275 and target element 25298.
 *WARNING*: The geometrical gap may be too large.  Increase pinball if
 it is a true geometrical gap.  Decrease pinball if it is a false one.
 For total 84 contact elements, there are 43 elements are in contact.
 There are 43 elements are in sticking.
 Contacting area 6.459842046E-04.
 Max.  Pinball distance 8.307281584E-04.
 One of the contact searching regions contains at least 6 target
 elements.
 Max.  Pressure/force -3.60361718.
 Max.  Normal stiffness 5.115179205E+15.
 Min.  Normal stiffness 5.115179205E+15.
 Max.  Tangential stiffness 2.600463609E+15.
 Min.  Tangential stiffness 2.600463609E+15.
 *************************************************

 *************************************************
  SUMMARY FOR CONTACT PAIR IDENTIFIED BY REAL CONSTANT SET          62

 *** NOTE ***                            CP =      16.391   TIME= 07:41:36
 Contact pair is inactive.

 *************************************************
  SUMMARY FOR CONTACT PAIR IDENTIFIED BY REAL CONSTANT SET          65
 Max.  Penetration of -3.469446952E-18 has been detected between contact
 element 25361 and target element 25388.

 Max.  Geometrical penetration of -1.736955052E-04 has been detected
 between contact element 25361 and target element 25388.
 For total 12 contact elements, there are 12 elements are in contact.
 There are 12 elements are in sticking.
 Contacting area 1.598037028E-04.
 Max.  Pinball distance 5.687557171E-04.
 One of the contact searching regions contains at least 10 target
 elements.
 Max.  Pressure/force 1.659168649E-02.
 Max.  Normal stiffness 4.782228038E+15.
 Min.  Normal stiffness 4.782228038E+15.
 Max.  Tangential stiffness 2.238392511E+15.
 Min.  Tangential stiffness 2.238392511E+15.
 *************************************************

 *************************************************
  SUMMARY FOR CONTACT PAIR IDENTIFIED BY REAL CONSTANT SET          66

 *** NOTE ***                            CP =      16.391   TIME= 07:41:36
 Contact pair is inactive.

 *************************************************
  SUMMARY FOR CONTACT PAIR IDENTIFIED BY REAL CONSTANT SET          69
 Max.  Penetration of -2.775557562E-17 has been detected between contact
 element 25489 and target element 25534.

 Max.  Geometrical penetration of -1.021405789E-04 has been detected
 between contact element 25492 and target element 25546.
 For total 17 contact elements, there are 17 elements are in contact.
 There are 17 elements are in sticking.
 Contacting area 3.198795575E-04.
 Max.  Pinball distance 6.025809391E-04.
 One of the contact searching regions contains at least 13 target
 elements.
 Max.  Pressure/force 0.10475738.
 Max.  Normal stiffness 3.774282378E+15.
 Min.  Normal stiffness 3.774282378E+15.
 Max.  Tangential stiffness 1.00757777E+15.
 Min.  Tangential stiffness 1.00757777E+15.
 *************************************************

 *************************************************
  SUMMARY FOR CONTACT PAIR IDENTIFIED BY REAL CONSTANT SET          70

 *** NOTE ***                            CP =      16.391   TIME= 07:41:36
 Contact pair is inactive.

 *************************************************
  SUMMARY FOR CONTACT PAIR IDENTIFIED BY REAL CONSTANT SET          73
 Max.  Penetration of -2.775557562E-17 has been detected between contact
 element 25627 and target element 25656.

 Max.  Geometrical penetration of -1.736954878E-04 has been detected
 between contact element 25627 and target element 25656.
 For total 12 contact elements, there are 12 elements are in contact.
 There are 12 elements are in sticking.
 Contacting area 1.598037028E-04.
 Max.  Pinball distance 5.462957058E-04.
 One of the contact searching regions contains at least 10 target
 elements.
 Max.  Pressure/force -0.134715639.
 Max.  Normal stiffness 4.853642405E+15.
 Min.  Normal stiffness 4.853642405E+15.
 Max.  Tangential stiffness 2.182105532E+15.
 Min.  Tangential stiffness 2.182105532E+15.
 *************************************************

 *************************************************
  SUMMARY FOR CONTACT PAIR IDENTIFIED BY REAL CONSTANT SET          74

 *** NOTE ***                            CP =      16.391   TIME= 07:41:36
 Contact pair is inactive.

 *************************************************
  SUMMARY FOR CONTACT PAIR IDENTIFIED BY REAL CONSTANT SET          75

 *** NOTE ***                            CP =      16.391   TIME= 07:41:36
 Contact pair is inactive.

 *************************************************
  SUMMARY FOR CONTACT PAIR IDENTIFIED BY REAL CONSTANT SET          76

 *** NOTE ***                            CP =      16.391   TIME= 07:41:36
 No contact was detected.
 Max.  Pinball distance 4.789121561E-04.
 One of the contact searching regions contains at least 10 target
 elements.
 *************************************************

 *************************************************
  SUMMARY FOR CONTACT PAIR IDENTIFIED BY REAL CONSTANT SET          81

 *** NOTE ***                            CP =      16.391   TIME= 07:41:36
 Contact pair is inactive.

 *************************************************
  SUMMARY FOR CONTACT PAIR IDENTIFIED BY REAL CONSTANT SET          82
 Max.  Penetration of -1.055777603E-17 has been detected between contact
 element 25928 and target element 25891.

 Max.  Geometrical gap of 6.261542594E-04 has been detected between
 contact element 25925 and target element 25884.
 For total 12 contact elements, there are 12 elements are in contact.
 There are 12 elements are in sticking.
 Contacting area 3.655751766E-04.
 Max.  Pinball distance 1.660523857E-03.
 One of the contact searching regions contains at least 18 target
 elements.
 Max.  Pressure/force -9.27171305.
 Max.  Normal stiffness 6.022195924E+15.
 Min.  Normal stiffness 6.022195924E+15.
 Max.  Tangential stiffness 3.371969748E+15.
 Min.  Tangential stiffness 3.371969748E+15.
 *************************************************

 *************************************************
  SUMMARY FOR CONTACT PAIR IDENTIFIED BY REAL CONSTANT SET          83
 Max.  Penetration of -2.775557562E-17 has been detected between contact
 element 25967 and target element 25992.

 Max.  Geometrical gap of 5.551115123E-17 has been detected between
 contact element 25968 and target element 25993.

 Max.  Geometrical penetration of -5.551115123E-17 has been detected
 between contact element 25968 and target element 25993.
 For total 12 contact elements, there are 12 elements are in contact.
 There are 12 elements are in sticking.
 Contacting area 1.598037028E-04.
 Max.  Pinball distance 5.672820508E-04.
 One of the contact searching regions contains at least 7 target
 elements.
 Max.  Pressure/force -0.16857417.
 Max.  Normal stiffness 6.073524563E+15.
 Min.  Normal stiffness 6.073524563E+15.
 Max.  Tangential stiffness 2.835437129E+15.
 Min.  Tangential stiffness 2.835437129E+15.
 *************************************************

 *************************************************
  SUMMARY FOR CONTACT PAIR IDENTIFIED BY REAL CONSTANT SET          84

 *** NOTE ***                            CP =      16.391   TIME= 07:41:36
 Contact pair is inactive.

 *************************************************
  SUMMARY FOR CONTACT PAIR IDENTIFIED BY REAL CONSTANT SET          85
 Max.  Penetration of -2.775557562E-17 has been detected between contact
 element 26014 and target element 26039.

 Max.  Geometrical penetration of -1.736954878E-04 has been detected
 between contact element 26009 and target element 26050.
 For total 12 contact elements, there are 12 elements are in contact.
 There are 12 elements are in sticking.
 Contacting area 1.598037028E-04.
 Max.  Pinball distance 5.687557171E-04.
 One of the contact searching regions contains at least 10 target
 elements.
 Max.  Pressure/force -0.148170475.
 Max.  Normal stiffness 5.338403957E+15.
 Min.  Normal stiffness 5.338403957E+15.
 Max.  Tangential stiffness 2.498718869E+15.
 Min.  Tangential stiffness 2.498718869E+15.
 *************************************************

 *************************************************
  SUMMARY FOR CONTACT PAIR IDENTIFIED BY REAL CONSTANT SET          86

 *** NOTE ***                            CP =      16.391   TIME= 07:41:36
 Contact pair is inactive.

 *************************************************
  SUMMARY FOR CONTACT PAIR IDENTIFIED BY REAL CONSTANT SET          87

 *** NOTE ***                            CP =      16.391   TIME= 07:41:36
 Contact pair is inactive.

 *************************************************
  SUMMARY FOR CONTACT PAIR IDENTIFIED BY REAL CONSTANT SET          88
 Max.  Penetration of -2.775557562E-17 has been detected between contact
 element 26117 and target element 26061.

 Max.  Geometrical gap of 6.001E-04 has been detected between contact
 element 26121 and target element 26066.
 *WARNING*: The geometrical gap may be too large.  Increase pinball if
 it is a true geometrical gap.  Decrease pinball if it is a false one.
 For total 12 contact elements, there are 12 elements are in contact.
 There are 12 elements are in sticking.
 Contacting area 6.88562182E-05.
 Max.  Pinball distance 6.04807593E-04.
 One of the contact searching regions contains at least 14 target
 elements.
 Max.  Pressure/force -4.59522251.
 Max.  Normal stiffness 9.459454222E+15.
 Min.  Normal stiffness 9.459454222E+15.
 Max.  Tangential stiffness 4.770937995E+15.
 Min.  Tangential stiffness 4.770937995E+15.
 *************************************************

 *************************************************
  SUMMARY FOR CONTACT PAIR IDENTIFIED BY REAL CONSTANT SET          93

 *** NOTE ***                            CP =      16.391   TIME= 07:41:36
 Contact pair is inactive.

 *************************************************
  SUMMARY FOR CONTACT PAIR IDENTIFIED BY REAL CONSTANT SET          94
 Max.  Penetration of -5.225028234E-17 has been detected between contact
 element 26545 and target element 26332.

 Max.  Geometrical gap of 5.057185782E-04 has been detected between
 contact element 26554 and target element 26357.
 *WARNING*: The geometrical gap may be too large.  Increase pinball if
 it is a true geometrical gap.  Decrease pinball if it is a false one.
 For total 95 contact elements, there are 44 elements are in contact.
 There are 44 elements are in sticking.
 Contacting area 1.020843317E-04.
 Max.  Pinball distance 5.542362277E-04.
 One of the contact searching regions contains at least 18 target
 elements.
 Max.  Pressure/force -5.06610276.
 Max.  Normal stiffness 1.742895099E+16.
 Min.  Normal stiffness 1.742895099E+16.
 Max.  Tangential stiffness 9.031742714E+15.
 Min.  Tangential stiffness 9.031742714E+15.
 *************************************************

 *************************************************
  SUMMARY FOR CONTACT PAIR IDENTIFIED BY REAL CONSTANT SET          97
 Max.  Penetration of -2.775557562E-17 has been detected between contact
 element 26857 and target element 26887.

 Max.  Geometrical penetration of -5.551115123E-17 has been detected
 between contact element 26857 and target element 26887.
 For total 17 contact elements, there are 17 elements are in contact.
 There are 17 elements are in sticking.
 Contacting area 1.882075331E-04.
 Max.  Pinball distance 6.107597346E-04.
 One of the contact searching regions contains at least 7 target
 elements.
 Max.  Pressure/force 8.641254678E-02.
 Max.  Normal stiffness 3.113340108E+15.
 Min.  Normal stiffness 3.113340108E+15.
 Max.  Tangential stiffness 8.424143619E+14.
 Min.  Tangential stiffness 8.424143619E+14.
 *************************************************

 *************************************************
  SUMMARY FOR CONTACT PAIR IDENTIFIED BY REAL CONSTANT SET          98

 *** NOTE ***                            CP =      16.391   TIME= 07:41:36
 Contact pair is inactive.

 *************************************************
  SUMMARY FOR CONTACT PAIR IDENTIFIED BY REAL CONSTANT SET         105
 Max.  Penetration of -2.775557562E-17 has been detected between contact
 element 27527 and target element 27557.

 Max.  Geometrical penetration of -5.551115123E-17 has been detected
 between contact element 27527 and target element 27557.
 For total 17 contact elements, there are 17 elements are in contact.
 There are 17 elements are in sticking.
 Contacting area 1.882075321E-04.
 Max.  Pinball distance 5.995155631E-04.
 One of the contact searching regions contains at least 7 target
 elements.
 Max.  Pressure/force 9.34926176E-02.
 Max.  Normal stiffness 3.368426542E+15.
 Min.  Normal stiffness 3.368426542E+15.
 Max.  Tangential stiffness 8.94656539E+14.
 Min.  Tangential stiffness 8.94656539E+14.
 *************************************************

 *************************************************
  SUMMARY FOR CONTACT PAIR IDENTIFIED BY REAL CONSTANT SET         106

 *** NOTE ***                            CP =      16.391   TIME= 07:41:36
 Contact pair is inactive.

 *************************************************
  SUMMARY FOR CONTACT PAIR IDENTIFIED BY REAL CONSTANT SET         113

 *** NOTE ***                            CP =      16.391   TIME= 07:41:36
 Contact pair is inactive.

 *************************************************
  SUMMARY FOR CONTACT PAIR IDENTIFIED BY REAL CONSTANT SET         114
 Max.  Penetration of -1.107908108E-17 has been detected between contact
 element 27816 and target element 27781.

 Max.  Geometrical gap of 1.388433726E-03 has been detected between
 contact element 27816 and target element 27781.
 *WARNING*: The geometrical gap may be too large.  Increase pinball if
 it is a true geometrical gap.  Decrease pinball if it is a false one.
 For total 12 contact elements, there are 12 elements are in contact.
 There are 12 elements are in sticking.
 Contacting area 3.441695228E-04.
 Max.  Pinball distance 1.502046115E-03.
 One of the contact searching regions contains at least 17 target
 elements.
 Max.  Pressure/force -5.34206213.
 Max.  Normal stiffness 6.148976656E+15.
 Min.  Normal stiffness 6.148976656E+15.
 Max.  Tangential stiffness 2.922845955E+15.
 Min.  Tangential stiffness 2.922845955E+15.
 *************************************************

 *************************************************
  SUMMARY FOR CONTACT PAIR IDENTIFIED BY REAL CONSTANT SET         115

 *** NOTE ***                            CP =      16.391   TIME= 07:41:36
 Contact pair is inactive.

 *************************************************
  SUMMARY FOR CONTACT PAIR IDENTIFIED BY REAL CONSTANT SET         116
 Max.  Penetration of -5.43189669E-18 has been detected between contact
 element 27891 and target element 27855.

 Max.  Geometrical gap of 5.876189201E-04 has been detected between
 contact element 27883 and target element 27844.
 For total 13 contact elements, there are 13 elements are in contact.
 There are 13 elements are in sticking.
 Contacting area 3.673304724E-04.
 Max.  Pinball distance 1.506707746E-03.
 One of the contact searching regions contains at least 16 target
 elements.
 Max.  Pressure/force -8.17823626.
 Max.  Normal stiffness 4.782482946E+15.
 Min.  Normal stiffness 4.782482946E+15.
 Max.  Tangential stiffness 2.373758172E+15.
 Min.  Tangential stiffness 2.373758172E+15.
 *************************************************

 *************************************************
  SUMMARY FOR CONTACT PAIR IDENTIFIED BY REAL CONSTANT SET         117

 *** NOTE ***                            CP =      16.391   TIME= 07:41:36
 Contact pair is inactive.

 *************************************************
  SUMMARY FOR CONTACT PAIR IDENTIFIED BY REAL CONSTANT SET         118

 *** NOTE ***                            CP =      16.391   TIME= 07:41:36
 No contact was detected.
 Max.  Pinball distance 4.789121562E-04.
 One of the contact searching regions contains at least 11 target
 elements.
 *************************************************

 *************************************************
  SUMMARY FOR CONTACT PAIR IDENTIFIED BY REAL CONSTANT SET         119

 *** NOTE ***                            CP =      16.391   TIME= 07:41:36
 Contact pair is inactive.

 *************************************************
  SUMMARY FOR CONTACT PAIR IDENTIFIED BY REAL CONSTANT SET         120
 Max.  Penetration of -1.549758586E-17 has been detected between contact
 element 28050 and target element 28017.

 Max.  Geometrical gap of 5.450774883E-04 has been detected between
 contact element 28046 and target element 28004.
 For total 12 contact elements, there are 12 elements are in contact.
 There are 12 elements are in sticking.
 Contacting area 3.664891599E-04.
 Max.  Pinball distance 1.493604424E-03.
 One of the contact searching regions contains at least 16 target
 elements.
 Max.  Pressure/force -4.48446301.
 Max.  Normal stiffness 5.913531869E+15.
 Min.  Normal stiffness 5.913531869E+15.
 Max.  Tangential stiffness 2.796661541E+15.
 Min.  Tangential stiffness 2.796661541E+15.
 *************************************************

 *************************************************
  SUMMARY FOR CONTACT PAIR IDENTIFIED BY REAL CONSTANT SET         123
 Max.  Penetration of -3.469446952E-18 has been detected between contact
 element 28142 and target element 28177.

 Max.  Geometrical penetration of -6.938893904E-18 has been detected
 between contact element 28150 and target element 28167.
 For total 12 contact elements, there are 12 elements are in contact.
 There are 12 elements are in sticking.
 Contacting area 1.598037028E-04.
 Max.  Pinball distance 5.672820508E-04.
 One of the contact searching regions contains at least 7 target
 elements.
 Max.  Pressure/force -1.814687823E-02.
 Max.  Normal stiffness 5.230481538E+15.
 Min.  Normal stiffness 5.230481538E+15.
 Max.  Tangential stiffness 2.441860802E+15.
 Min.  Tangential stiffness 2.441860802E+15.
 *************************************************

 *************************************************
  SUMMARY FOR CONTACT PAIR IDENTIFIED BY REAL CONSTANT SET         124

 *** NOTE ***                            CP =      16.391   TIME= 07:41:36
 Contact pair is inactive.

 *************************************************
  SUMMARY FOR CONTACT PAIR IDENTIFIED BY REAL CONSTANT SET         125
 Max.  Penetration of -3.469446952E-18 has been detected between contact
 element 28199 and target element 28219.

 Max.  Geometrical penetration of -6.938893904E-18 has been detected
 between contact element 28199 and target element 28219.
 For total 12 contact elements, there are 12 elements are in contact.
 There are 12 elements are in sticking.
 Contacting area 1.598037028E-04.
 Max.  Pinball distance 6.065243642E-04.
 One of the contact searching regions contains at least 9 target
 elements.
 Max.  Pressure/force 2.316525445E-02.
 Max.  Normal stiffness 6.676930005E+15.
 Min.  Normal stiffness 6.676930005E+15.
 Max.  Tangential stiffness 3.332769377E+15.
 Min.  Tangential stiffness 3.332769377E+15.
 *************************************************

 *************************************************
  SUMMARY FOR CONTACT PAIR IDENTIFIED BY REAL CONSTANT SET         126

 *** NOTE ***                            CP =      16.391   TIME= 07:41:36
 Contact pair is inactive.

 *************************************************
  SUMMARY FOR CONTACT PAIR IDENTIFIED BY REAL CONSTANT SET         127
 Max.  Penetration of -3.469446952E-18 has been detected between contact
 element 28244 and target element 28285.

 Max.  Geometrical penetration of -1.736955052E-04 has been detected
 between contact element 28253 and target element 28272.
 For total 12 contact elements, there are 12 elements are in contact.
 There are 12 elements are in sticking.
 Contacting area 1.598037028E-04.
 Max.  Pinball distance 5.687557171E-04.
 One of the contact searching regions contains at least 8 target
 elements.
 Max.  Pressure/force 1.672851227E-02.
 Max.  Normal stiffness 4.821665384E+15.
 Min.  Normal stiffness 4.821665384E+15.
 Max.  Tangential stiffness 2.256851743E+15.
 Min.  Tangential stiffness 2.256851743E+15.
 *************************************************

 *************************************************
  SUMMARY FOR CONTACT PAIR IDENTIFIED BY REAL CONSTANT SET         128

 *** NOTE ***                            CP =      16.391   TIME= 07:41:36
 Contact pair is inactive.

 *************************************************
  SUMMARY FOR CONTACT PAIR IDENTIFIED BY REAL CONSTANT SET         129
 Max.  Penetration of -2.775557562E-17 has been detected between contact
 element 28307 and target element 28331.

 Max.  Geometrical gap of 5.551115123E-17 has been detected between
 contact element 28308 and target element 28334.
 For total 12 contact elements, there are 12 elements are in contact.
 There are 12 elements are in sticking.
 Contacting area 1.598037028E-04.
 Max.  Pinball distance 6.065243642E-04.
 One of the contact searching regions contains at least 9 target
 elements.
 Max.  Pressure/force -0.164514472.
 Max.  Normal stiffness 5.927258501E+15.
 Min.  Normal stiffness 5.927258501E+15.
 Max.  Tangential stiffness 2.958573118E+15.
 Min.  Tangential stiffness 2.958573118E+15.
 *************************************************

 *************************************************
  SUMMARY FOR CONTACT PAIR IDENTIFIED BY REAL CONSTANT SET         130

 *** NOTE ***                            CP =      16.391   TIME= 07:41:36
 Contact pair is inactive.

 *************************************************
  SUMMARY FOR CONTACT PAIR IDENTIFIED BY REAL CONSTANT SET         133

 *** NOTE ***                            CP =      16.391   TIME= 07:41:36
 Contact pair is inactive.

 *************************************************
  SUMMARY FOR CONTACT PAIR IDENTIFIED BY REAL CONSTANT SET         134
 Max.  Penetration of -2.032687093E-17 has been detected between contact
 element 28850 and target element 28750.

 Max.  Geometrical gap of 5.07768796E-04 has been detected between
 contact element 28856 and target element 28765.
 *WARNING*: The geometrical gap may be too large.  Increase pinball if
 it is a true geometrical gap.  Decrease pinball if it is a false one.
 For total 35 contact elements, there are 35 elements are in contact.
 There are 35 elements are in sticking.
 Contacting area 1.02084498E-04.
 Max.  Pinball distance 5.319597865E-04.
 One of the contact searching regions contains at least 10 target
 elements.
 Max.  Pressure/force -0.401954121.
 Max.  Normal stiffness 9.327583583E+15.
 Min.  Normal stiffness 9.327583583E+15.
 Max.  Tangential stiffness 5.151796179E+15.
 Min.  Tangential stiffness 5.151796179E+15.
 *************************************************


                         ***********  PRECISE MASS SUMMARY  ***********

   TOTAL RIGID BODY MASS MATRIX ABOUT ORIGIN
               Translational mass               |   Coupled translational/rotational mass
         11.812        0.0000        0.0000     |     0.0000       0.41770       -1.1361
         0.0000        11.812        0.0000     |   -0.41770        0.0000       0.51568
         0.0000        0.0000        11.812     |     1.1361      -0.51568        0.0000
     ------------------------------------------ | ------------------------------------------
                                                |         Rotational mass (inertia)
                                                |    0.23035      -0.46411E-01  -0.17530E-01
                                                |   -0.46411E-01   0.11326      -0.40289E-01
                                                |   -0.17530E-01  -0.40289E-01   0.30347

   TOTAL MASS =  11.812
     The mass principal axes coincide with the global Cartesian axes

   CENTER OF MASS (X,Y,Z)=   0.43658E-01   0.96179E-01   0.35362E-01

   TOTAL INERTIA ABOUT CENTER OF MASS
        0.10631       0.31866E-02   0.70622E-03
        0.31866E-02   0.75980E-01  -0.11569E-03
        0.70622E-03  -0.11569E-03   0.17169

   PRINCIPAL INERTIAS =   0.10664       0.75648E-01   0.17170
   ORIENTATION VECTORS OF THE INERTIA PRINCIPAL AXES IN GLOBAL CARTESIAN
     ( 0.995, 0.103,-0.011) (-0.103, 0.995, 0.002) ( 0.011,-0.001, 1.000)


  *** MASS SUMMARY BY ELEMENT TYPE ***

  TYPE      MASS
     1  0.151602E-01
     2  0.641873E-01
     3  0.109171E-03
     4  0.302682E-02
     5  0.627379E-02
     6  0.627413E-02
     7  0.151488E-01
     8  0.163757E-03
     9  0.297215E-02
    10  0.759495E-02
    11  0.214954E-03
    12  0.319532E-01
    13  0.463410E-04
    14  0.984632E-04
    15  0.303752E-02
    16  0.109171E-03
    17  0.302682E-02
    18  0.767462E-02
    19  0.133227E-03
    20  0.315946E-01
    21  0.692437E-04
    22  0.734478E-02
    23  0.343346E-03
    24  0.646326E-01
    25  0.627391E-02
    26  0.627416E-02
    27  0.151482E-01
    28  0.646270E-01
    29  0.627391E-02
    30  0.627416E-02
    31  0.151527E-01
    32  0.316388E-01
    33  0.625935E-04
    34  0.321521E-01
    35  0.463410E-04
    36  0.984632E-04
    37  0.303752E-02
    38  0.313615E-02
    39  0.109171E-03
    40  0.302682E-02
    41  0.756194E-02
    42  0.154716E-03
    43  0.313615E-02
    44  0.645310E-01
    45  0.627379E-02
    46  0.627405E-02
    47   1.63179
    48   5.42786
    49  0.957772
    50  0.526529E-01
    51  0.964794
    52  0.459709E-01
    53   1.08935
    54   1.08935

 Range of element maximum matrix coefficients in global coordinates
 Maximum = 8.366889911E+10 at element 26256.
 Minimum = 106409364 at element 8907.

   *** ELEMENT MATRIX FORMULATION TIMES
     TYPE    NUMBER   ENAME      TOTAL CP  AVE CP

        1       300  SOLID187      0.031   0.000104
        2      1276  SOLID187      0.047   0.000037
        3        12  SOLID187      0.000   0.000000
        4        18  SOLID186      0.016   0.000868
        5       190  SOLID187      0.000   0.000000
        6       120  SOLID187      0.000   0.000000
        7       293  SOLID187      0.047   0.000160
        8        18  SOLID187      0.000   0.000000
        9        21  SOLID186      0.016   0.000744
       10       119  SOLID187      0.000   0.000000
       11         3  SOLID186      0.000   0.000000
       12       256  SOLID187      0.047   0.000183
       13         4  SOLID186      0.000   0.000000
       14        12  SOLID187      0.000   0.000000
       15        18  SOLID186      0.000   0.000000
       16        12  SOLID187      0.000   0.000000
       17        18  SOLID186      0.000   0.000000
       18       153  SOLID187      0.031   0.000204
       19         4  SOLID186      0.000   0.000000
       20       233  SOLID187      0.000   0.000000
       21         6  SOLID186      0.000   0.000000
       22       124  SOLID187      0.016   0.000126
       23         4  SOLID186      0.000   0.000000
       24      1219  SOLID187      0.062   0.000051
       25       192  SOLID187      0.000   0.000000
       26       122  SOLID187      0.016   0.000128
       27       279  SOLID187      0.016   0.000056
       28      1236  SOLID187      0.172   0.000139
       29       193  SOLID187      0.016   0.000081
       30       122  SOLID187      0.031   0.000256
       31       278  SOLID187      0.031   0.000112
       32       214  SOLID187      0.000   0.000000
       33         6  SOLID186      0.000   0.000000
       34       265  SOLID187      0.062   0.000236
       35         4  SOLID186      0.000   0.000000
       36        12  SOLID187      0.000   0.000000
       37        18  SOLID186      0.000   0.000000
       38        12  SOLID186      0.016   0.001302
       39        12  SOLID187      0.000   0.000000
       40        18  SOLID186      0.000   0.000000
       41       151  SOLID187      0.016   0.000103
       42         4  SOLID186      0.000   0.000000
       43        12  SOLID186      0.000   0.000000
       44      1281  SOLID187      0.219   0.000171
       45       190  SOLID187      0.000   0.000000
       46       127  SOLID187      0.016   0.000123
       47       562  SOLID187      0.047   0.000083
       48      2815  SOLID187      0.266   0.000094
       49       464  SOLID187      0.047   0.000101
       50        20  SOLID186      0.000   0.000000
       51       512  SOLID187      0.062   0.000122
       52        20  SOLID186      0.000   0.000000
       53       490  SOLID186      0.047   0.000096
       54       390  SOLID186      0.094   0.000240
       55       198  CONTA174      0.031   0.000158
       56       198  TARGE170      0.000   0.000000
       57        76  CONTA174      0.000   0.000000
       58        76  TARGE170      0.000   0.000000
       59        77  CONTA174      0.016   0.000203
       60        77  TARGE170      0.000   0.000000
       61        96  CONTA174      0.016   0.000163
       62        96  TARGE170      0.000   0.000000
       63        21  CONTA174      0.000   0.000000
       64        21  TARGE170      0.000   0.000000
       65        28  CONTA174      0.000   0.000000
       66        28  TARGE170      0.000   0.000000
       67        33  CONTA174      0.000   0.000000
       68        33  TARGE170      0.000   0.000000
       69        43  CONTA174      0.016   0.000363
       70        43  TARGE170      0.000   0.000000
       71        24  CONTA174      0.000   0.000000
       72        24  TARGE170      0.000   0.000000
       73        29  CONTA174      0.000   0.000000
       74        29  TARGE170      0.000   0.000000
       75        48  CONTA174      0.000   0.000000
       76        48  TARGE170      0.000   0.000000
       77        27  CONTA174      0.000   0.000000
       78        27  TARGE170      0.000   0.000000
       79        33  CONTA174      0.000   0.000000
       80        33  TARGE170      0.000   0.000000
       81        34  CONTA174      0.000   0.000000
       82        34  TARGE170      0.000   0.000000
       83        25  CONTA174      0.000   0.000000
       84        25  TARGE170      0.000   0.000000
       85        29  CONTA174      0.000   0.000000
       86        29  TARGE170      0.000   0.000000
       87        43  CONTA174      0.000   0.000000
       88        43  TARGE170      0.000   0.000000
       89        33  CONTA174      0.000   0.000000
       90        33  TARGE170      0.000   0.000000
       91        36  CONTA174      0.016   0.000434
       92        36  TARGE170      0.000   0.000000
       93       198  CONTA174      0.016   0.000079
       94       198  TARGE170      0.000   0.000000
       95        75  CONTA174      0.000   0.000000
       96        75  TARGE170      0.000   0.000000
       97        32  CONTA174      0.000   0.000000
       98        32  TARGE170      0.000   0.000000
       99        33  CONTA174      0.000   0.000000
      100        33  TARGE170      0.000   0.000000
      101       197  CONTA174      0.016   0.000079
      102       197  TARGE170      0.000   0.000000
      103        75  CONTA174      0.000   0.000000
      104        75  TARGE170      0.000   0.000000
      105        32  CONTA174      0.000   0.000000
      106        32  TARGE170      0.000   0.000000
      107        33  CONTA174      0.000   0.000000
      108        33  TARGE170      0.000   0.000000
      109        40  CONTA174      0.000   0.000000
      110        40  TARGE170      0.000   0.000000
      111        27  CONTA174      0.016   0.000579
      112        27  TARGE170      0.000   0.000000
      113        38  CONTA174      0.000   0.000000
      114        38  TARGE170      0.000   0.000000
      115        34  CONTA174      0.000   0.000000
      116        34  TARGE170      0.000   0.000000
      117        47  CONTA174      0.000   0.000000
      118        47  TARGE170      0.000   0.000000
      119        32  CONTA174      0.000   0.000000
      120        32  TARGE170      0.000   0.000000
      121        33  CONTA174      0.016   0.000473
      122        33  TARGE170      0.000   0.000000
      123        25  CONTA174      0.000   0.000000
      124        25  TARGE170      0.000   0.000000
      125        25  CONTA174      0.016   0.000625
      126        25  TARGE170      0.000   0.000000
      127        29  CONTA174      0.000   0.000000
      128        29  TARGE170      0.000   0.000000
      129        25  CONTA174      0.000   0.000000
      130        25  TARGE170      0.000   0.000000
      131       204  CONTA174      0.000   0.000000
      132       204  TARGE170      0.000   0.000000
      133        82  CONTA174      0.000   0.000000
      134        82  TARGE170      0.000   0.000000
      135        84  CONTA174      0.016   0.000186
      136        84  TARGE170      0.000   0.000000
      137       108  CONTA174      0.000   0.000000
      138       108  TARGE170      0.000   0.000000
      139        33  CONTA174      0.000   0.000000
      140        33  TARGE170      0.000   0.000000
      141        42  CONTA174      0.016   0.000372
      142        42  TARGE170      0.000   0.000000
      143       770  SURF154       0.047   0.000061
 Time at end of element matrix formulation CP = 16.390625.

 DISTRIBUTED PCG SOLVER SOLUTION CONVERGED

 DISTRIBUTED PCG SOLVER SOLUTION STATISTICS

   NUMBER OF ITERATIONS=         415
   NUMBER OF EQUATIONS =       92055
   LEVEL OF CONVERGENCE=           1
   CALCULATED NORM     = 0.95437E-08
   SPECIFIED TOLERANCE = 0.10000E-07
   TOTAL CPU TIME (sec)=        3.41
   TOTAL WALL TIME(sec)=        3.40
   TOTAL MEMORY (GB)   =        0.05


   *** ELEMENT RESULT CALCULATION TIMES
     TYPE    NUMBER   ENAME      TOTAL CP  AVE CP

        1       300  SOLID187      0.016   0.000052
        2      1276  SOLID187      0.094   0.000073
        3        12  SOLID187      0.000   0.000000
        4        18  SOLID186      0.016   0.000868
        5       190  SOLID187      0.016   0.000082
        6       120  SOLID187      0.016   0.000130
        7       293  SOLID187      0.016   0.000053
        8        18  SOLID187      0.000   0.000000
        9        21  SOLID186      0.000   0.000000
       10       119  SOLID187      0.000   0.000000
       11         3  SOLID186      0.000   0.000000
       12       256  SOLID187      0.000   0.000000
       13         4  SOLID186      0.000   0.000000
       14        12  SOLID187      0.000   0.000000
       15        18  SOLID186      0.000   0.000000
       16        12  SOLID187      0.000   0.000000
       17        18  SOLID186      0.000   0.000000
       18       153  SOLID187      0.000   0.000000
       19         4  SOLID186      0.000   0.000000
       20       233  SOLID187      0.047   0.000201
       21         6  SOLID186      0.000   0.000000
       22       124  SOLID187      0.000   0.000000
       23         4  SOLID186      0.000   0.000000
       24      1219  SOLID187      0.109   0.000090
       25       192  SOLID187      0.016   0.000081
       26       122  SOLID187      0.000   0.000000
       27       279  SOLID187      0.062   0.000224
       28      1236  SOLID187      0.094   0.000076
       29       193  SOLID187      0.016   0.000081
       30       122  SOLID187      0.016   0.000128
       31       278  SOLID187      0.000   0.000000
       32       214  SOLID187      0.000   0.000000
       33         6  SOLID186      0.000   0.000000
       34       265  SOLID187      0.031   0.000118
       35         4  SOLID186      0.000   0.000000
       36        12  SOLID187      0.000   0.000000
       37        18  SOLID186      0.000   0.000000
       38        12  SOLID186      0.000   0.000000
       39        12  SOLID187      0.000   0.000000
       40        18  SOLID186      0.000   0.000000
       41       151  SOLID187      0.016   0.000103
       42         4  SOLID186      0.016   0.003906
       43        12  SOLID186      0.016   0.001302
       44      1281  SOLID187      0.125   0.000098
       45       190  SOLID187      0.016   0.000082
       46       127  SOLID187      0.000   0.000000
       47       562  SOLID187      0.062   0.000111
       48      2815  SOLID187      0.203   0.000072
       49       464  SOLID187      0.016   0.000034
       50        20  SOLID186      0.000   0.000000
       51       512  SOLID187      0.047   0.000092
       52        20  SOLID186      0.000   0.000000
       53       490  SOLID186      0.062   0.000128
       54       390  SOLID186      0.016   0.000040
       55       198  CONTA174      0.016   0.000079
       57        76  CONTA174      0.000   0.000000
       59        77  CONTA174      0.016   0.000203
       61        96  CONTA174      0.016   0.000163
       63        21  CONTA174      0.000   0.000000
       65        28  CONTA174      0.000   0.000000
       67        33  CONTA174      0.000   0.000000
       69        43  CONTA174      0.000   0.000000
       71        24  CONTA174      0.000   0.000000
       73        29  CONTA174      0.000   0.000000
       75        48  CONTA174      0.000   0.000000
       77        27  CONTA174      0.000   0.000000
       79        33  CONTA174      0.000   0.000000
       81        34  CONTA174      0.000   0.000000
       83        25  CONTA174      0.000   0.000000
       85        29  CONTA174      0.000   0.000000
       87        43  CONTA174      0.000   0.000000
       89        33  CONTA174      0.016   0.000473
       91        36  CONTA174      0.000   0.000000
       93       198  CONTA174      0.016   0.000079
       95        75  CONTA174      0.000   0.000000
       97        32  CONTA174      0.000   0.000000
       99        33  CONTA174      0.000   0.000000
      101       197  CONTA174      0.000   0.000000
      103        75  CONTA174      0.000   0.000000
      105        32  CONTA174      0.000   0.000000
      107        33  CONTA174      0.000   0.000000
      109        40  CONTA174      0.000   0.000000
      111        27  CONTA174      0.000   0.000000
      113        38  CONTA174      0.000   0.000000
      115        34  CONTA174      0.000   0.000000
      117        47  CONTA174      0.000   0.000000
      119        32  CONTA174      0.000   0.000000
      121        33  CONTA174      0.000   0.000000
      123        25  CONTA174      0.000   0.000000
      125        25  CONTA174      0.000   0.000000
      127        29  CONTA174      0.000   0.000000
      129        25  CONTA174      0.000   0.000000
      131       204  CONTA174      0.000   0.000000
      133        82  CONTA174      0.000   0.000000
      135        84  CONTA174      0.000   0.000000
      137       108  CONTA174      0.000   0.000000
      139        33  CONTA174      0.000   0.000000
      141        42  CONTA174      0.000   0.000000
      143       770  SURF154       0.047   0.000061

   *** NODAL LOAD CALCULATION TIMES
     TYPE    NUMBER   ENAME      TOTAL CP  AVE CP

        1       300  SOLID187      0.000   0.000000
        2      1276  SOLID187      0.000   0.000000
        3        12  SOLID187      0.000   0.000000
        4        18  SOLID186      0.000   0.000000
        5       190  SOLID187      0.000   0.000000
        6       120  SOLID187      0.000   0.000000
        7       293  SOLID187      0.000   0.000000
        8        18  SOLID187      0.000   0.000000
        9        21  SOLID186      0.000   0.000000
       10       119  SOLID187      0.000   0.000000
       11         3  SOLID186      0.000   0.000000
       12       256  SOLID187      0.000   0.000000
       13         4  SOLID186      0.000   0.000000
       14        12  SOLID187      0.000   0.000000
       15        18  SOLID186      0.000   0.000000
       16        12  SOLID187      0.000   0.000000
       17        18  SOLID186      0.000   0.000000
       18       153  SOLID187      0.016   0.000102
       19         4  SOLID186      0.000   0.000000
       20       233  SOLID187      0.000   0.000000
       21         6  SOLID186      0.000   0.000000
       22       124  SOLID187      0.000   0.000000
       23         4  SOLID186      0.000   0.000000
       24      1219  SOLID187      0.000   0.000000
       25       192  SOLID187      0.000   0.000000
       26       122  SOLID187      0.000   0.000000
       27       279  SOLID187      0.000   0.000000
       28      1236  SOLID187      0.031   0.000025
       29       193  SOLID187      0.000   0.000000
       30       122  SOLID187      0.000   0.000000
       31       278  SOLID187      0.000   0.000000
       32       214  SOLID187      0.000   0.000000
       33         6  SOLID186      0.000   0.000000
       34       265  SOLID187      0.000   0.000000
       35         4  SOLID186      0.000   0.000000
       36        12  SOLID187      0.000   0.000000
       37        18  SOLID186      0.000   0.000000
       38        12  SOLID186      0.000   0.000000
       39        12  SOLID187      0.000   0.000000
       40        18  SOLID186      0.000   0.000000
       41       151  SOLID187      0.000   0.000000
       42         4  SOLID186      0.000   0.000000
       43        12  SOLID186      0.000   0.000000
       44      1281  SOLID187      0.047   0.000037
       45       190  SOLID187      0.000   0.000000
       46       127  SOLID187      0.000   0.000000
       47       562  SOLID187      0.016   0.000028
       48      2815  SOLID187      0.016   0.000006
       49       464  SOLID187      0.016   0.000034
       50        20  SOLID186      0.000   0.000000
       51       512  SOLID187      0.000   0.000000
       52        20  SOLID186      0.000   0.000000
       53       490  SOLID186      0.000   0.000000
       54       390  SOLID186      0.000   0.000000
       55       198  CONTA174      0.000   0.000000
       57        76  CONTA174      0.000   0.000000
       59        77  CONTA174      0.000   0.000000
       61        96  CONTA174      0.000   0.000000
       63        21  CONTA174      0.000   0.000000
       65        28  CONTA174      0.000   0.000000
       67        33  CONTA174      0.000   0.000000
       69        43  CONTA174      0.000   0.000000
       71        24  CONTA174      0.000   0.000000
       73        29  CONTA174      0.000   0.000000
       75        48  CONTA174      0.000   0.000000
       77        27  CONTA174      0.000   0.000000
       79        33  CONTA174      0.000   0.000000
       81        34  CONTA174      0.000   0.000000
       83        25  CONTA174      0.000   0.000000
       85        29  CONTA174      0.000   0.000000
       87        43  CONTA174      0.000   0.000000
       89        33  CONTA174      0.000   0.000000
       91        36  CONTA174      0.000   0.000000
       93       198  CONTA174      0.000   0.000000
       95        75  CONTA174      0.000   0.000000
       97        32  CONTA174      0.000   0.000000
       99        33  CONTA174      0.000   0.000000
      101       197  CONTA174      0.000   0.000000
      103        75  CONTA174      0.000   0.000000
      105        32  CONTA174      0.000   0.000000
      107        33  CONTA174      0.000   0.000000
      109        40  CONTA174      0.000   0.000000
      111        27  CONTA174      0.000   0.000000
      113        38  CONTA174      0.000   0.000000
      115        34  CONTA174      0.000   0.000000
      117        47  CONTA174      0.000   0.000000
      119        32  CONTA174      0.000   0.000000
      121        33  CONTA174      0.000   0.000000
      123        25  CONTA174      0.000   0.000000
      125        25  CONTA174      0.016   0.000625
      127        29  CONTA174      0.000   0.000000
      129        25  CONTA174      0.000   0.000000
      131       204  CONTA174      0.000   0.000000
      133        82  CONTA174      0.000   0.000000
      135        84  CONTA174      0.000   0.000000
      137       108  CONTA174      0.000   0.000000
      139        33  CONTA174      0.000   0.000000
      141        42  CONTA174      0.000   0.000000
      143       770  SURF154       0.000   0.000000
 *** LOAD STEP     1   SUBSTEP     1  COMPLETED.    CUM ITER =      1
 *** TIME =   1.00000         TIME INC =   1.00000      NEW TRIANG MATRIX


 *** MAPDL BINARY FILE STATISTICS
  BUFFER SIZE USED= 16384
       12.625 MB WRITTEN ON ELEMENT SAVED DATA FILE: file0.esav
        7.375 MB WRITTEN ON RESULTS FILE: file0.rst

Plot equivalent stress#

Plot equivalent stress.

mapdl.post1()  # Enter postprocessor
mapdl.set(1, 1)  # Select first load step
mapdl.post_processing.plot_nodal_eqv_stress()  # Plot equivalent stress
../../_images/TBROM_cosim_pymapdl_results.png

Exit MAPDL instance#

Exit the MAPDL instance.

mapdl.exit()

Total running time of the script: (0 minutes 35.303 seconds)

Gallery generated by Sphinx-Gallery